ESP32-DevKit C Board Type-C ESP32-WROVER ESP32-WROOM-32D/U Development Board New
2.ESP32-DevKitC is an entry-level ESP32 development board with integrated ESP32 pins pinned out for easy connection and use. It can be used to evaluate the full range of ESP32 modules and chips, and can be easily plugged into a breadboard.
3.ESP32-DevKitC is a small development board based on ESP32 modules, supporting Wi-Fi and Bluetooth functions. The board has a rich set of peripherals, so users can easily realize product development.
4.The on-board LDOs are led out to supply power for external components.ESP32-DevKitC groups different peripheral interfaces to help users get started with product development easily.
5. The ESP32-DevKitC has excellent RF performance, allowing users to design and develop applications without having to consider RF and antenna design. The basic system requirements are already included on the development board, so users only need to connect the USB cable for development.
ESP32-DevKitC development board:
ESP32 based module
EN: Reset button.
Boot: Download button. Press and hold the Boot key, and press the EN key at the same time (do not release the Boot key at this time) to enter the "Firmware Download" mode and download the firmware through the serial port.
USB-to-UART Bridge: Single chip USB-UART bridge that provides up to 3 Mbps transfer rate.
Interface: TYPE-C connector that can be used as a power supply for the board or as a communication interface between the PC and the ESP32-WROOM-32 module.
Communication: 2.4 GHz Wi-Fi + Bluetooth
Processor: high-performance Xtensa@32-bit LX6 dual-core processor with ultra-low power co-processor.
Multiple peripherals: Optimal power performance, RF performance, stability, versatility and reliability for various application scenarios and power requirements.
The board can be powered by one of the following three power supply options:
TYPE-C connector power supply (default)
5V/GND pin supply
3V3/GND pin supply
Dimension: 54.4*27.9mm
ESP-WROOM-32D
Chip: ESP32-D0WD
SPI: Flash 32 Mbit, 3.3 V
Crystal: 40 MHz
Antenna: On-board PCB antenna
Wi-Fi protocol: 802.11 b/g/n (802.11n at speeds up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs guard interval support
Operating channel center frequency range: 2412~2484 MHz
Bluetooth protocol: BT v4.2 BR/EDR and BT LE compliant
RF: NZIF receiver with -97 dBm sensitivity; Class-1, Class-2 and Class-3 transmitters; AFH
Integrated crystal: 40 MHz crystal
Integrated SPI flash1: 4 MB
Operating/Power Voltage: 3.0 V ~ 3.6 V
Average operating current: 80 mA
Supply current minimum: 500 mA
Recommended operating temperature range: -40 °C ~ +85 °C
Chip: ESP32-D0WD
SPI: Flash 32 Mbit, 3.3 V
Crystal: 40 MHz
Antenna: External antenna connector, need to be used with external antenna
Wi-Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs guard interval support
Operating channel center frequency range: 2412~2484 MHz
Bluetooth protocol: BT v4.2 BR/EDR and BT LE compliant
RF: NZIF receiver with -97 dBm sensitivity; Class-1, Class-2 and Class-3 transmitters; AFH
Integrated crystal: 40 MHz crystal
Integrated SPI flash1: 4 MB
Operating/Power Voltage: 3.0 V ~ 3.6 V
Average operating current: 80 mA
Supply current minimum: 500 mA
Recommended operating temperature range: -40 °C ~ +85 °C
Supply Voltage: 2.3V ~ 3.6V
Frequency: 2.4 GHz ~ 2.5 GHz
Mounting Type : SMT
Data Rate: 150Mbps
Protocol: 802.11b/g/n
Storage Capacity: 4MB
Wi-Fi Protocol: 802.11 b/g/n (802.11n with speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs protection interval support
Operating channel center frequency range: 2412 ~ 2484 MHz
Bluetooth protocol: Compliant with Bluetooth V4.2 BR/EDR and Low Power Bluetooth standards
RF: NZIF receiver with -97 dBm sensitivity
Class-1, Class-2 and Class-3 transmitters; AFH
Module interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, Pulse Counter, GPIO, Capacitive Touch Sensor, ADC, DAC, TWAI® (ISO 11898-1 protocol compliant, i.e. CAN specification 2.0)
On-chip sensors: Hall sensors
Integrated crystal: 40 MHz crystal
Integrated SPI flash: 4 MB
Integrated PSRAM: 8 MB
Operating voltage/supply voltage: 2.3 V ~ 3.6 V
Operating Current: Average: 80 mA
Minimum supply current: 500 mA
Recommended operating temperature -40 °C ~ 85 °C
1 x Development Board
Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.
International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.
Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.
For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the " Ask the seller a question" link on eBay.
We expect positive feedback and 5 scores DSR from you.
- We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
- If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
- Please include your eBay ID and item number with any email requests.