2 In 1 Remote Control On-off Relay Switch For RC Model Airplane Drone DIY Parts
Specification:
2 outputs
1 channel of steering gear signal input, control 2 channels of electronic switches
This device does not need calibration and can be accurately compatible with remote control devices of various brands.
Only supports 5V voltage receiver, otherwise the module may be damaged. If the receiver and steering gear use high voltage system, you should add a step-down module to the relay
This remote switch remotely controls up to 2 electrical equipment on the aircraft model through a switch channel on the remote controlThis device uses receiver power supply, external power supply, only for controlled equipment
Application:
Remote control model rocket launch
Remote control model smoke control
Weapon system control like real machine
Aviation light control of model aircraft
Control of various remote switch systems
Typical application:
Connect
Insert the signal input cable into an idle receiver channel, which corresponds to a switch on the remote control.
Connect the control switch to the device
Trigger
(Take the throttle channel as an example) Turn the throttle lever on the remote control to full throttle, and a relay is closed (that is, the wiring at both ends is connected). Turn the throttle lever on the remote control to half throttle, neither relay is closed (neither relay is connected). Move the throttle lever on the remote control to the minimum throttle, and the other relay is closed (that is, the wiring at both ends is connected).
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1-3cm differences due to manual measurement.
Package includes:
1x PWM Relay Switch