2PCS HRB 14.8V 6000mAh 50C 4S Lipo Battery Hardcase Dean for RC Car Buggy Truck

Brand: HRB

Capacity: 6000mAh Hardcase

Cells: 4S

Voltage: 14.8V

Continuous discharge rate: 50C

Burst Rate: 100C

Size (L*W*H): 138x46x50mm

Weight: 580g

Suggest Charge Rate: 0.5C-1C(3A-6A)

Connector Type: Deans Female Plug

Watt Hours: 88.8Wh

Silicone Wire: 10 AWG

Balance Connector Type: 5PINS JST-XH Plug

Compatible RC Models

All 1/8, 1/10 Scale Vehicles like Slash 4x4, Bandit,  Rustler, Stampede, Stampede 4x4, E-Maxx, Summit, Monster Jam Replicas, etc.

(Only if the voltage, dimension and the plug  match, then it will fit)

Using Notice

1. Do not overcharge more than 4.2V and do not discharge below 3.7V per cell.

2. A new battery will achieve the best performance after 2 or 3 complete cycles of charge & discharge.

3. If it won’t hold a full charge or loses the charge very quickly in a short time, please use a balance charger to cycle several times. For most LiPo batteries, the safest charge rate is 0.5C-1C.

4. Optimum voltage for long term storage is 3.85V range per cell.

5. When transporting, a LiPo safe bags are always strongly recommended!

6. Use of a balance charger is recommended for battery longevity.

7. Please don't leave when charging.