Just Peel & Stick to save huge $$$

• Installation takes just several minutes.

• No Opening Tools Required

• No Soldering Required

• No firmware Hacking
•  

Super easy drum counter reset solution.

The Easiest & Quickest Fuser Reset Guaranteed.

Why Replace Perfectly Good Parts?

(Drum, Belt, Fuser Reset Kits are available on eBay. See below urls)***

Simply Peel off & Stick to reset the Fuser Page Counter

and reuse and save huge $$$ while also protecting our planet.

(*watch the video guides below for further details)

Multi-Buy Discount Promotion**:

Buy 2x chips and get 10% discount for all of our reset products,

Buy 4x chips and get 25% discount for all of our reset products.

Our solution is the

• Best Price solution : We designed these products.
• Simplest, 30 seconds reset solution : Simply Peel & Stick to reset the page counter or 980 Error code.
• Better Compatibility solution : Our kits work not only on retail version. It also work on starter fusers.

• Cleanest Solution / Home & Office Friendly  :  No opening, No disassembly, No Mess, No Hacking.
• Lowest Human Error Solution : No opening means less chance of breaking the sensitive parts.
• It comes with detailed instruction manual (English version only) and installation video guide.
• SAFE Solution : Our reset kit is not a firmware reset solution. Our reset kits use same sensitivity fusible links as the OEM's parts which is very important to protect your printer and your safety.

*** Buy Other Reset Kits for your printer ***

​​​​​​​

• Drum Reset Chip : https://www.ebay.co.uk/itm/115924431618
• Belt Reset Chip : https://www.ebay.co.uk/itm/126108900555
• Fuser Reset Chip : https://www.ebay.co.uk/itm/115924504205
• Fuser Reset Plug (Much cheaper for multi-use) : https://www.ebay.co.uk/itm/126109652532
•  Comprehensive Reset Kit containing all reset kits : 

• About Error 980 : This typically indicates that there was or is a paper jam around the roller in your fuser unit. The fuser reset kit can be used to clear this error, but it's essential to ensure that the paper is removed and the fuser unit is clean before applying the reset kit. If you've purchased a fuser reset chip to remove the 980 error code, you should follow below insturctions BEFORE applying the fuser reset chip.

1. Remove Wrapped Paper: Make sure to properly remove any paper that may be wrapped around the fuser heating roller.
2. Clean the Fuser Unit: After removing the paper, check for any paper particles or sticky residue in the fuser unit. Clean the fuser unit carefully and thoroughly to ensure that there are no obstructions or contaminants left behind.
3. If you frequently use sticky printing materials such as sticker paper, it's recommended to buy the fuser reset kit in multi quantities or buy reusable plug type fuser reset kit. When the page counter warning pops up, it will allow you to print a bit more which can last at least few days or to few weeks until you prepare the new fuser. However, the '980 error' will immediately and completely lock up the printer asking for a fuser replacement. So, having multiple reset kits ready may be beneficial to address the 980 error as needed if you use sticky material for business printing.

• Please check the Video Guides & FAQs before purchasing.

• Please note that the photos provided are for illustrative purposes only. The printer, tools and fuser unit are not included in the reset kit. We frequently update the design of our reset chips to enhance usability. As a result, you may receive an improved version of the reset chip with a slightly different color or design.

• If you cannot find the model number or reset kit you need, please contact us via eBay. Provide us with your printer's model number, and we will inform you of the availability of the reset kits in our stock and guide you on how to make the purchase through eBay. 

Take the fuser unit out and flip it to check the fuser connector on the bottom surface of the fuser.

Your fuser connector will look like one of below examples.

1. A4 Type 1 (OKI C6xx - C7xx, MC6xx-MC7xx, ES64xx - ES74xx  Series A4 colour Printers and C9000-C9500 very old A3 printers)​​​​​​​.

Click the video guide on the right below.

2. A4 Type 2 (OKI C3xx - C5xx, MC3xx - MC5xx & ES34xx-ES54xx Series A4 printers, and B7xx, MB7xx, ES71xx type High-end A4 mono printers) Click the video guide on the right below.

3. A3 Type (Most of OKI A3 size colour and B&W printers including C800-C8000, MC800-MC8000, B8000 , C9600 - C9850 & C9 Series)​​​​​​​

Click the video guide on the right below.

100+ times reset tests full version and fast version.

What is the Page Counter Reset? Click below to watch the 15 minutes educational video.

Q1: Why should I buy it from this seller? 

A1 : We are laser printer product designers and know all technical details. We are the product designers of our reset kits. So, can provide quicker and more accurate technical support.

Printing is essential for business operations, and we understand the need for fast delivery, cost savings, and reliable support. As product designers, we possess extensive knowledge of printers and can offer prompt and accurate assistance. Unlike resellers, we handle the entire process, from design to manufacturing and testing. Our team of experienced printer engineers, who serve as product designers, are available to help customers with any printer-related issues, even beyond our products.

In comparison to other sellers, our reset kits offer superior convenience. Many competing products are incompatible with bundle/starter parts, leading to potential issues such as toner leakage or motherboard damage caused by using incorrect components. This lack of transparency is why most sellers do not showcase their actual reset products or provide instructions before selling.

In contrast, we provide full visibility by displaying all items and offering video guides on product usage before purchase. Customers will have a clear understanding of what they will receive and how to utilize our product. Our reset kits are compatible with both retail and starter version parts. Our sticker-type reset chips can be easily installed without the need for tools, taking less than 25 seconds. Simply peel and stick like a sticker. While our cable-type products may require 2-4 screws to open, they do not involve any toner leakage.

Q2 : Does the Drum Reset Chip also reset the TONER level or other counters?

A : No

Some customers may mistakenly believe that the Drum Reset chip can reset all page counters, including toner and rollers, by resetting the entire printer through the drum unit. However, this is not accurate. The drum reset chip is specifically designed to reset the page counter of the drum only. Similarly, the belt reset chip and fuser reset kit are intended to reset the belt counter and fuser counter respectively. If you are in need of a solution to reset the toner counter, drum reset kits are not suitable. We recommend exploring other listings to find the appropriate product for your needs.

  ↵

Q3 : The manufacturer's user manual shows that I should change the toner cartridge when replacing the drum unit. Do I need to change the toner cartridge when applying the drum counter reset chip?

A : NO (99.9%) & YES (0.1%)

The drum reset chip functions similarly to a new drum unit. When a new drum unit is installed, the manufacturer recommends changing the toner cartridge because the printer's firmware assumes the new drum unit is empty. The printer attempts to transfer toner from the cartridge to the drum unit's toner reservoir and adjusts the toner level accordingly. If the toner level was below 40% before replacing the drum unit, the printer may ask for a new toner cartridge after the replacement.

However, when using the drum reset chip without replacing the drum unit, no actual toner transfer occurs as the drum unit is already filled. Most printers won't require a new cartridge after using the chip, but there is a slight possibility that it may be needed due to the OEM's programmed firmware. To reset the toner warning, you can either use a new toner or a toner chip. So, the answer is mostly NO but in very rare cases YES.

Q4 : Does it work?

Yes, of course. We have received hundreds and thousands of positive feedback from our customers who already used our products successfully.

Q5 : Is there anything I should know before purchasing? In which case I should not buy these reset kits?

The part that you intend to reset the counter of must be in good working condition or have been providing good quality prints until it was locked by the counter. If the part has any physical defects, this reset kit will not improve printing defects or quality at all. Our reset kits will remove "replace part",  "error 980" or light or message asking to replace the parts. If you are getting any different error code or symptom, before applying our reset kit, kindly ask us for tech support. We can help you quickly.

Please note that all brand names and trademarks are the property of  their respective owners and are used for descriptive purposes only. This  product is a compatible product, not an O.E.M. Product.

Q6 : How does it work?

To illustrate the situation more clearly, let's assume that you bought a pair of shoes last year. The manufacturer recommends replacing the shoes after walking 10,000 steps. However, if the climate and road conditions where you use the shoes are very mild, and you never engage in any extreme sports while wearing them, the shoes may still be in good condition. Even if a small area of the sole becomes worn due to contact with rough surfaces, if the shoes are still in good condition, comfortable, and suitable for walking, you can continue using them even after 20,000 or 30,000 steps. The number of steps walked is not the most important factor when considering whether to discard the shoes or not. What truly matters is whether the shoes continue to serve their purpose and meet the expectations of the user. You wouldn't throw them away solely because you reached the recommended step limit of 10,000.

A similar situation occurs when your laser printer requires a new maintenance part such as a drum, fuser, or belt unit. Most of these parts are durable enough to continue working for 2-3 more cycles beyond their specified usage limits. Therefore, they don't need to be replaced if the printing quality was acceptable before the page counter warning appeared.

Approximately 15 years ago, printer users had the option to override the part change warning and reset the message through the printer's maintenance menu. They could also easily replace the counter reset chip, which was exposed on the surface of the parts. Replacement of the entire parts was only necessary when the part was physically broken or when the printing quality became unsatisfactory.

However, many printer manufacturers have implemented page counter systems with zero set technology (counter reset circuits) built-in, making it incredibly difficult for end users to replace the counter circuits due to complex designs that hide the counter circuits inside the intricate parts. Additionally, the page counter reset menus have been removed from the printer's maintenance menu. These significant changes prevent or limit users from reusing parts and force them to replace components after a specific number of pages, regardless of the actual condition of the parts. This practice leads to unnecessary expenses and environmental waste as users are compelled to replace parts, even if they are still functioning well. 

Some users have attempted to reset the counter by opening complex parts, which is time-consuming, difficult, prone to human error, and potentially dangerous. Many people are unaware of the technical specifications of fusible links and often use higher-rated ones, causing fire hazards or risking short-circuit issues that permanently damage their printer.

To address these issues, we have developed our EASY RESET series. These kits feature sticker or cable-type counter chips with OEM-grade fusible links in the counter circuit, ensuring reliable reset functions. They are designed for safe and easy use by ordinary users, taking 25 seconds to a few minutes, without the need to dismantle complex parts or replace hidden counter circuits. By using our easy and reliable reset kits, you can save time, money, and contribute to environmental sustainability by extending the lifespan of printer parts that are still in good condition. Choose reputable reset kits like ours to save time, money, and adopt a more sustainable approach to printing.

Q7 : What are the main benefits of using it? 

A : QUICK, EASY, SAFE & HUGE SAVINGS in ECO-FRIENDLY way.

By re-using the parts, you will save huge and unnecessary cost. The reset kit installation is as easy as or even quicker and easier than replacing the parts, thus you will save your time. Finally, re-using the parts will reduce the amount of landfill, thus, it will save environment.

Q8 : Can I re-use the reset chips/kits?

A : Yes (for Reusable Kits) / NO (for disposable kits)

This limitation is not imposed by us. Our reset circuits function in exactly the same way as the page counter circuits on new drum units, transfer belts, and fuser units. It's important to note that the counter is not saved on the parts themselves, but on the printer motherboard. 

When a new drum, belt, or fuser unit is installed, it contains a special fusible link that generates a "NEW PART" signal upon the first installation. Once this signal is detected, the printer motherboard resets the relevant counter in its counter systems and cuts the fusible link on the part to prevent the same parts resetting counter on another printer. As a result, the new part will no longer be able to generate the "NEW PART" signal. This is why nearly new parts, even if they have only been used for one page on another machine, cannot reset the page counter on a different machine.

Similarly, when our reset chip is detected by your printer motherboard, ther printer resets the relevant counter and cuts the fusible link on our reset product, rendering it unusable for future resets.

We also offer reusable reset chips/kits that require a disposable reset fuse cartridge for each reset performed.

Q9 : When do I actually need to replace the parts? How many cycles can I re-use the parts? 

A : There is no strict guide line for this. If the quality is acceptable, you can keep using the same parts.

Determining if a part is worn out is simple which can be done by evaluating the printing quality. If the printing quality meets your needs and remains acceptable, there is no immediate need to replace the parts. As the parts wear out, the printing quality gradually decreases. If the printing quality becomes unacceptable to you, that is when you would need to consider replacing the parts. The number of cycles you can reuse the parts depends on your printing quality requirements. If you require clean and sharp prints without any defects, reusing the parts for 2-3 cycles may be suitable. However, if you are content with some printing defects, you may not need to replace the parts until the issues become more severe, which could be 6-8 cycles later. In our test environments, we have seen parts work well for 4-5 cycles without any issues. So, reusing the same parts for 2-3 cycles is generally acceptable for most cases and more cycles if super clean/sharp prints are not a requirement.

It's important to note that using printer parts beyond the manufacturer's stated lifespan does not pose any safety issues. Similar to lawnmower blades, which are replaced when functionality or safety concerns arise, laser printer parts such as drum units, transfer belts, and fuser units will eventually wear out and need replacement. However, unlike lawnmower blades, there are no safety implications when using laser printer parts beyond their specified lifespan. Therefore, parts must be replaced if there are significant functionality issues. Otherwise, it is users choice. 

Please remember that each time you reset the remaining life of the parts, you will need a new reset kit if you purchased a disposable version or a disposable fuse cartridge if you opted for a reusable version, both of which are available from us.

Q10 : When I get a printing quality issue, how do I know which part causes the issue?

If you are technically inclined, you can download the service manual for your printer model and search for "periodical marks" to identify the culprits based on the distance between the marks. 

If you are not familiar with technical details, don't worry. We are here to assist you. Simply send us several clear and focused photos of the printed pages showing the printing defects. Typically, you will notice periodical marks consistently appearing in the same vertically location on all pages. 

To help us identify the issue, place a ruler next to the paper in the photos so we can determine the radius/diameter of the culprit(s). Laser printer parts have unique diameters/radii on their rotational components, making it easier to pinpoint the problem. With your photos, we can determine the source of the problem and provide guidance to save your time, money, and contribute to a sustainable approach.

It's important to note that if the part is physically broken, our page counter reset kits will not fix the issue. In such cases, you will need to replace the broken part.

Q11 : Does it come with any instruction manual or video guide?

A : YES for BOTH

Our reset kits include a detailed instruction manual to guide you through the installation process. Additionally, you can find a video installation guide on this listing. Simply revisit this listing and play the instruction video to assist you with the installation of our reset kits.

Q12 : Should I wait until my printer shows PART REPLACEMENT message?

A :  YES & NO

Our reset kits are designed to reset the remaining life of the part back to 100%, regardless of the current life remaining. They can be used at any time, even when the remaining life is above 95%.

For end-users, it's important to note that our reset kits are intended for one-time use and are not reusable. Additionally, our reusable kits require a disposable fuse cartridge for each reset. Therefore, if your main goal is cost-saving, it may be more beneficial to wait until the printer prompts you to replace the parts before using our reset kits.

However, if you are a printer seller or maintenance engineer and need to reset the counters before selling the machine or visiting the site next time, our product can be used to reset the remaining life back to full without waiting for the warning message to appear.

Q13 : How many pages will our product work for? ONE MORE CYCLE per kit.

The number of pages that our reset chip can work for depends on the specific printer model and the manufacturer-specified part life. If the part life is 30,000 pages, our chip will work for 30,000 pages. If the new part life is 100,000 pages, our chip will work for 100,000 pages. It is important to consider the part life specified by the manufacturer for your specific printer model. For users of our reusable reset kits, each reset will require the use of one disposable fuse cartridge, which can be purchased from us.

Q14 : My printer model number has different suffix which is not specified here. Will it work on my printer?

If the manufacturer and model number are listed, our reset kit will work on your printer model. Please disregard any suffixes or additional options mentioned in the eBay listing title, as they do not affect the compatibility of our reset kit. The main components such as the drum unit, belt, and fuser units are the same for printers with the same model number, even if they have different suffixes or options. For example, the OKI C711N, C711DN, and C711WT printers may have additional features or options, but they use the same hardware components, including the drum, belt, and fuser units. Therefore, our product for the C711 model will work on all C711N, C711DN, and C711WT models.

Thank you for visiting our ebay store!