Raspberry Pi Pico RP2040 Microcontroller Dual Core M0+

The Raspberry Pi Pico is a microcontroller board having a small size with dimensions of 51mm x 21mm x 1mm. RP2040 chip is featured on this board. This board has a Micro USB port that facilitates both data and power supply. Also, this board is low-cost and flexible. Dual-castellated pins are featured by the edges of RPi Pico. This chip’s design is suitable for DIP and surface mount module, whatever is required. Specifications of Raspberry Pi Pico  Made by RPi Foundation  Microcontroller Chip- RP2040  Memory: 264kB RAM   Flash- 2Mbyte  1.8 V / 3.3V Volts (Note that 3.3V is by default at Raspberry Pi Pico) Data Interface: Micro USB Port  Power interface: Micro USB port (the board supports external supplies)  A Real-Time Counter  4 alarms are possessed by the timer  2x IO (PIO) programmable blocks Interface emulation of VGA and SD Card is supported  I/O Pins: 40x Pins (21x51 DIP) dual castellated   26x 3.3V multi-function I/O GPIO  2x SPI 2x UART  16x PWM Channels  3 ADC capable pins  23 digital-only pins  2x I2C  3-Pin ARM SWD (Serial Wire Debug) Port  Dimension - 51mm x 21mm x 1mm Raspberry Pi Pico Pinout Numbering The Raspberry Pi Pico features 40 Pins (2.54mm / 0.1” pitch grid). It is attuned with both breadboard and Veroboard as it has 1mm small holes. Also, the mechanical fixing is held by 4x drilled mounting holes (2.1mm / approx. 0.05mm).  Raspberry Pi Pico Pin Definition Surface Mount Technology (SMT) Footprint Raspberry Pi Pico Dimensions (mm) Specifications of RP2040 Microcontroller  Cortex M0+ Dual-Core (133MHz Max.)  Variable Core Frequency supported by On-Chip PLL  Storage of RAM - Multi-bank 264kByte  External Quad-SPI flash  Full-Crossbar Bus Fabric  USB1.1   ADC: 500ksps 12-Bit   Items Included Raspberry Pi Pico (1)