Choose Strip Length - 50 cm / 1 Metre / 3 Metre / 5 Metre / 10 Metre / 25 Metre
Adhesive Application Instructions:
1 - Clean and dry surface before application.
You can use any cleaner that will not leave a film or oily surface.
2 - Peel tape from fastener and press firmly into place.
The adhesive is pressure sensitive, the more you push the more it will stick.
3 - Once in place try to leave for 24 hours before attempting to hang or hold any weight
otherwise the adhesive may fail, as its in needs time to fully bond.
Sew On Application Instructions
Put your Velcro in place and then use the smooth outer edge of the Velcro to sew through and stitch it in place.
Always us the soft fluffy part on the outside area if this is going near skin etc as it is a lot smoother and wont irritate.