【LAUNCH CRP129I OBD2 Scanner Highlights】
WHAT UPDATES HAVE WE MADE ON CAR DIAGNOSTIC SCANNER LAUNCH CRP129I ?
Apart from other basic OBD2 code reader, the LAUNCH CRP129I scan tool features 8 most commonly used reset functions: Oil / EPB / SAS / TPMS Reset, Throttle Body Adjustment/DPF Regeneration/Injector Coding/BMS Reset. Save your money and time!
1. Oil Reset: After the oil changing, use the oil reset function to make the warning light disappear.
2. EPB Reset (Electronic Parking Brake): Assist you to deactivate and activate the brake control unit, open and close the brake cylinder when you change or install brake pads for your vehicles.
3. SAS Reset (Antilock Brake System): Use the car computer code reader to help you control the anti-lock brake system, calibrate the steering angle sensor after disassemble and replacement
4. Throttle Body Adjustment: Throttle matching is required after you clean the throttle but the idle speed is unstable or excessively high. CRP129I can tackle the task for you.
5. TPMS Reset: This car diagnostic obdii scanner allows the on your vehicles to reset TPMS data after replacing the tire, the tire pressure sensor or the TPMS module.
6. DPF Regeneration: especially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
7. Injector Coding:Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
8. BAT Battery Service:allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4 main system obd2 scanner abs/srs/engine/transmission diagnoses of LAUNCH CRP129I obdii scanner enable you to diagnose your vehicles deeply and maintain them in a good condition by reading and erasing DTCs. It also provides you with real-time live data stream in text format or graph format.
【LAUNCH CRP129I supports FULL OBD2 Functions Of ENGINE SYSTEM】
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream: Reads and displays live /PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and
are ready for inspection and maintenance testing.
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time
the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from
the vehicle’s on-board computer.
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and
CVN (Calibration verification number), etc.
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Other powerful features:
Since the Launch has been rooting in the automotive aftermarkets since 1992, it has accumulated a wealth of data on models around the world so as to provide a wide range of compatibility for users. As for the 2023 latest updated version of LAUNCH CRP129I, it has gathered most of the popular vehicle models, which means once you have the scanner in your hand, all you gotta do is to plug in and power on.
Let’s have a look at the list and check out if your vehicle is on it!
AutoVIN Technology Available
The diagnostic code reader LAUNCH CRP129I equips with the AutoVIN technology which means that it will automatically read and store your vehicle’s VIN number, by simply pressing a button. It immediately identifies your car, and you don’t have to enter the year, make, engine, etc. of your car.
Automatic Inspection Report
There might arise certain problems which would be beyond your level of understanding while diagnosing a vehicle. This LAUNCH CRP129I code reader can automatically save the Inspection Report and transfer the report to the Cloud Server, or even print the data via the PC.
Real-Time Monitoring of Battery Voltage in Gragh
This LAUNCH CRP129I obd2 scanner also features the real-time monitoring of voltage in graphic way across the car’s battery terminals. One of the most common reasons for a car failure is the faulty charging system. This helps you to get early warnings for possible battery problems.
Wi-Fi Wireless FREE Update
Having Wi-Fi included means that the code reader has the internet enabled as well. With the current Android system installed, it makes internet connections relatively fast. With just one click, you will be able to get all the new upcoming software updates for lifetime.
Wide-Ranging Cars Coverage
LAUNCH CRP129I obd2 scanner has wide compatibility rates with several modes of the OBD2 motor vehicles. The diagnostic scanner works on 57 Car Brands (Manufacturers) made from 1996 and forward, as long as the car has a 16-pin OBD-II port. Its use is therefore widespread.
Various Languages Support
LAUNCH CRP129I obd2 scanner has a multilingual functionality including 9 languages: English, Spanish, French, German, Italian, Russian, Portuguese, Japanese, Korean, in the user’s choice. Thanks to this, there is no need for translation, which enables you to get the repair information in time.
Screen | 5 inch |
Voltage input | 9-18V |
Working Temperature | -10℃ ~ 55℃ |
Storage Temperature | -20℃ ~ 70℃ |
Dimension | 8.97”(L)×4.92”(W)×1.36”(H) |
Unit Weight | <565g |
Packing List