Product Details
- Antenna: 5g 4g lte wifi 4x4 mimo antenna
- Brand: SIGNALPLUS
- Impedance: 50 Ohm
- Maximum Range: 10 Meters
- Product Dimensions: 7.09 x 2.36 x 15.75 inches
- Item Weight: 4.99 pounds
- Manufacturer: SIGNALPLUS
- Item model number: 5g mimo antenna
- Date First Available: September 15, 2022
- The 4x4 MIMO antenna will Allow You To Connect On More Bands /Improve Signal Quality /Increase Signal Strength .
- Advantage 1 :698-4000MHz wide band will allow to connect on more signal bands ,as 4G /5G /wifi /LTE .The 4x4 mimo and the 7.5 dBi high gains will more improve signal quality and increase signal strength .
- Advantage 2 :use a 4x4 mimo enabled routers and antenna will more improve Signal Quality /Increase Signal Strength than rather than a single or 2x2 MIMO device
- The 4x4 MIMO 5G 4G LTE Antennas can be used on router with only 2 external antenna ports ,the unused connections would just remain unconnected .We'd recommend that any unused ports be sealed away, so that they aren't accidentally damaged while not in use .
- Support Carrier /Routers :The 4x4 mimo panel antenna support wifi 4G LTE and 5G cellular signals from any carrier and work for router / hotspot which supports the use of external antennas .
- Installation of The Antenna Requires Patience And Skill. any antenna is heavily dependent on the surroundings .You must take into considerations, antenna hight, location,building clearance, line of sight,etc .i recommend move around your hotspot and antenna or using data speed test results as a good guide to help you find the best position and direction for the antenna.
- Full Kit: The Package Include an 4x 4 MIMO Antenna, a Holding Pole, Four 10 Meter RG58 Wires with SMA Connectors, Four TS-9 Adapters.
Specifications Electrical Specification Frequency Range
:-2700/3300-4000MHz Peak Gain : 7.5 dBi Polarization :Vertical
Horizontal Half-power Beam width :45±3º Vertical Half-power Beam width :45±3º
Front to back ratio(dB) :≥23 VSWR :≤1.5 Input Impedance :50Ω Maximum input
power :100W Lightning protection :DC Ground Mechanical Specification Input
connector type :N Female Dimensions(Heigh/width/depth) :41018060mm Antenna
weight :1.20kg Radome material :UPVC Radome color :Gray Mechanical tilt
:0°~10° Operating temperature :-40℃~60℃ Rated Wind Velocit :60m/s Mounting
hardware :￠35mm~￠90mm
