Descriptions:

Name：3D Light Edge Finder

Model：MF60

Color：gray-green, gray-red, gold-green, gold-redProbe

Material：Tungsten Steel

Body Material：Aluminum Alloy

Measuring accuracy：＜0.01mm

Repeatability：＜0.01mm

Probe direction：±X±Y +Z

Probe safety stroke：XY±15º, Z+5mm

Power supply：Built-in battery 1616 (3.6v)

Trigger life：5,000,000 times

Usage range：Metal

Features:

• ♞【Product】The 3D edge finder supports X,Y,Z three-coordinate/direction measurement,reciprocating positioning accuracy ≤ 0.01,XY deflection range 0-6°, Z-direction telescoping range of 1mm; Probe direction：±X ±Y +Z; Probe safety stroke：XY±15º, Z+5mm; Trigger life:5,000,000 times; Usage range: Metal
• ♞【High accuracy】The edge finder adopts a sturdy sealed shell,is made of anodized aluminum alloy,with with a flat anti roll design and a tungsten steel ball head,good structural stability, excellent performance, and high measurement accuracy. Measuring accuracy is less than 0.01mm,repeatability is less than 0.01mm.
• ♞【Easy to use】The the probe can be rotated 180 degrees,no need to rotate the spindle during measurement and centering,more flexible and convenient.
• ♞【Waterproof】Support dustproof and a small amount of dripping and waterproofing (not support long term dripping and washing), can maximize the service life of the probe.
• ♞【Applications】Widely used for positioning and measurement of CNC lathes,milling machine etc,exceeding the safety range may damage the probe and probe,and does not support the detection of insulation materials and insulated machine tools.

Pls Note: It does not support the detection of insulating materials and insulating spindle.

How to use

1.The probe is clamped to the machine spindle by means of a tool holder, slightly loosened. Two fastening screws opposite each other at the bottom adjust the four symmetrical adjustment tops on the sides.

The ball end of the wire adjustment probe coincides with the center of the spindle.

2.There is no need to rotate the spindle when measuring alignment, and the alignment measurement allows the probe to rotate 180° for more accurate measurement.

3.The probe supports X, Y, Z three-direction measurement, reciprocating positioning accuracy ≤ 0.01, XY deflection range 0-6 °, Z-direction telescoping range of 1mm, beyond the safety range will damage the probe and the probe.

4.Probe built-in two CR16163V lithium button batteries, insufficient to loosen the fastening screws to adjust the top line, remove the top cover to replace, replace the battery positive and negative, and readjust the probe center position setting after replacement.

5.The side head does not support the detection of insulating materials and insulating bed.

6.The probe head supports dust and a small amount of dripping and waterproof, long time without dripping and flushing.