Brand New DieseRC 3pcs Relay Receivers with 2 Transmitters 433Mhz wireless Remote Control Switch Radio Frequency DC 12V 1 Channel Passive Output Relay Controller
Package include:
3x Relay Receiver board (included shell)
2x Transmitter (included battery)
1x Product manual
Parameter:
-Receiver Working voltage: DC 12V
-Input/Output voltage: 1~250V
-Quiescent Current: <5MA
-Max current: 10A
-RF frequency: 433MHz
-Working temperature: -30~+80
-Receiving Sensitivity: >97dbm
-Amount of storage remote controls: 20 pieces
-Support encoding: 1527 Learning code
-RF Operating mode: ASK superheterodyne wireless reception
-Receiving range: Open space is more than 50 meters
-Pin: COM,NO,NC
-Output Type: Passive output
- Operating mode: Momentary /Toggle/ Latched/ Delay Mode
-Battery: 2x CR2016(included)
Usage(Operation Mode):
Momentary Mode:
1. Press and hold one button, relay will turn on;
2. Release the button, this relay will turn off.
Toggle Mode:
1. Press one button, relay will turn on;
2. Press this button again, this relay will turn off.
Latched mode:
1. Press button “A”, relay will turn on;
2. Press button “B”, this relay will turn off.
Delay mode:
1. Press and hold on one button, relay will turn on;
2. Release the button, this relay will turn off after 5(or 10/15/20) seconds.
Reset:
Press the learning button (on the Receiver) 8 times. succeed.
Note:
After reset all the remote controls cannot work anymore.
Setup
1. Press the learning button (once for Momentary mode, twice for Toggle mode, 4/5/6/7 times for delay 5/10/15/20 seconds mode). Wait for 3 seconds;
2. Press one button. Succeed.
Setup latched mode
1. Press the learning button 3 times. Wait for 3 seconds;
2. Press button "A" .
3. Press button “B” . Succeed.
Note: This item has already been set up in toggle mode. If you want to change the operation mode please reset it firstly