Mobile

- Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

- SIM Switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail

- Status: Signal strength, Connected band, SINR, RSRP, RSRQ, Bytes sent/received

- Bridge: Direct connection (bridge) between mobile ISP and device on LAN

- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS (planned), SMS to EMAIL (planned), SMS to HTTP (planned), SMS to SMS (planned), scheduled SMS (planned), SMS autoreply (planned)

- Black/White list (planned): Operator black/white list

- Multiple PDN (planned): Possibility to use different PDNs for multiple network access and services

- Band management: Used band status display, Band lock (planned)

- APN: Auto APN

Ethernet

- LAN: 1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network

- Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned)

- Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP (planned), SSH, DHCP, Telnet, MQTT (planned), Wake On Lan (WOL) (planned)

- VoIP passthrough support (planned): H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

- Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

- Firewall: Port forward, traffic rules, custom rules

- QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

- DDNS (planned): Supported >25 service providers, others can be configured manually

- SSHFS (planned): Possibility to mount remote file system via SSH protocol

Security

- Authentication: Pre-shared key, digital certificates, X.509 certificates

- Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

- Attack prevention (planned): DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

- VLAN (planned): Tag based VLAN separation

- Mobile quota control: Custom data limits for both SIM cards

- WEB filter (planned): Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

- Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

- OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods

- OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

- IPsec: IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

- PPTP, L2TP: Client/Server services can run simultaneously

- DMVPN (planned): Method of building scalable IPsec VPNs

- GRE (planned): GRE tunnel

Serial Communication Modes

- Modes: Console, OverIP, Modem (planned), Modbus RTU master, Modbus gateway, NTRIP client (planned)

Modbus TCP Slave

- ID filtering: Respond to one ID in range [1;255] or any

- Allow remote access: Allow access through WAN

- Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality

Modbus TCP Master

- Supported functions: 01, 02, 03, 04, 05, 06, 15, 16

- Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

Modbus RTU Master

- Supported baud rates: From 300 to 3000000

- Supported functions: 01, 02, 03, 04, 05, 06, 15, 16

- Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

- Number of data bits: 7 or 8

- Number of stop bits: 1 or 2

- Parity bits: None, Even, Odd

- Flow control: None, RTS/CTS (only for RS232 interface), Xon/Xoff

MQTT Gateway

- Gateway: Allows sending commands and receiving data from Modbus Master trough MQTT broker

Modbus Data to Server

- Supported functions: HTTP(S), MQTT, Azure MQTT (planned)

Monitoring & Management

- WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

- FOTA: Firmware update from server, automatic notification

- SSH: SSH (v1, v2)

- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET

- Call (planned): Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer

- TR-069 (planned): OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

- MQTT (planned): MQTT Broker, MQTT publisher

- SNMP (planned): SNMP (v1, v2, v3), SNMP Trap

- JSON-RPC: Management API over HTTP/HTTPS

- Modbus: Modbus TCP status/control

- RMS: Teltonika Remote Management Systems (RMS)

Power

- Connector: 2 pins in 16 pin industrial terminal block

- Input voltage range: 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max

- Power consumption: Idle: <1.2 W, Max: <5 W

System Characteristics

- CPU: Qualcomm QCA9531, MIPS 24kc, 650 MHz

- RAM: 64 MB, DDR2

- Flash memory: 16MB SPI Flash (4 MB available for user)

Firmware/Configuration

- WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

- FOTA: Update FW/configuration from server

- RMS: Update FW/configuration for multiple devices

- Keep settings: Update FW without losing current configuration

Location Tracking

- GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS

- Coordinates (planned): GNSS coordinates via WebUI, SMS, TAVL, RMS

- NMEA: NMEA 0183

- NTRIP (planned): NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

- Server software (planned): Supported server software TAVL, RMS

- Mobile Network Geolocating: Location without using GPS, get approximate location based on mobile tower on RMS

- Geofencing (planned): Configurable multiple geofence zones

Input/Output

- Configurable I/O: 3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA

- Analog input: 1 x Analog input (0 - 30 V)

- Events (planned): SMS, Email

- Output control: HTTP POST/GET, Schedule

- I/O juggler (planned): Allows to set certain I/O conditions to initiate event

Serial

- RS232: Terminal block connector: TX, RX, RTS, CTS

- RS485: Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)

- Supported baud rates: From 300 to 3000000

- Number of data bits: 7 or 8

- Number of stop bits: 1 or 2

- Parity: None, Even, Odd

- Flow control: None, RTS/CTS (only for RS232 interface), Xon/Xof

IoT Platforms

- Cloud of Things (planned): Allows monitoring of: Device data, Mobile data, Network info, Availability

- ThingWorx (planned): Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

- Cumulocity (planned): Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP

- Azure IoT Hub (planned): Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

Physical Interfaces (Ports, LEDs, Antennas, Button, SIM)

- Ethernet: 1 x RJ45 port, 10/100 Mbps

- I/O’s: 3 x Configurable I/O, 1 x Analog input in 16 pin terminal block

- Status LEDs: 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED

- SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray

- Power: 2 pins in 16 pin terminal block

- Antennas: 1 x SMA connector for LTE, 1 x SMA connector for GNSS

- RS232: 4 pins in 16 pin terminal block (TX, RX, RTS, CTS)

- RS485: 4 pins in 16 pin terminal block (D+, D-, R+, R-)

- Reset: Reboot, restore to user default (planned), restore to factory defaults

Physical Specification

- Casing material: Aluminium housing with DIN rail mounting option

- Dimensions: 74 x 83 x 25 mm (L x W x H)

- Weight: 165 g

- Mounting options: DIN rail, wall mounting (additional kits needed), flat surface placement

Operating Environment

- Operating temperature: -40 C to 75 C

- Operating humidity: 10% to 90% non-condensing