Honda CB400  CB350 rebuilt set of carbs.   Set is in a very good condition. 

Parts have been dismantelled completely, cleaned and assembled with several new parts.

Topcovers and floatbowls have been polished.  Actuating levers and other steel parts have been re-zincplating.

All O-rings have been replaced by new ones in Viton quality. Viton is known for very good fuel resistance.

Floats have been adjusted to the correct level, so carbs can be fitted right away to your bike.

Jetting is the following:    slowjets 40 ,  mainjets 78  

Fuel line has been renewed.

If desired you can easily mount other size mainjets, purchase them via Ebay

Set has been bench synchronised, final sync has to be done after mounting on your bike using a vacuum synchro set.

Item is ideal for your restoration project.

As you can understand i can not give any garantee as the part has been used, nevertheless it is in an overall good condition.

EXPLANATION ON PRICING:

a) purchasing a used set of carbs  about €100,-

b) dismanteling complete set  + sorting out all parts 1,25 hour

c) cleaning all parts ultrasonic +checking on defects  2 hour

d) blasting carb housings, mounting bracket + small parts 0,5 hour  

e) spraying mounting bracket + polishing outer sides  0,25 hour

f) get all steel parts re-zincplated  € 15,-

g) set of new viton O-rings  € 17,50

h) polishing, topcovers, brass caps and drain screws  1 hour

i) Re-assemble the set and adjust to honda specifications  2 hour

j) Use several small new parts like screws and so on €  10,-

In case new pilot jets, main jets or fuelcut of valves are needed extra costs between € 20 and € 25 dependingon which part(s) needed

Above summary will give the buyer an idea about the costs and labor hours to get a carb set in used but almost new condition.

Extra option:  i also offer the buyer to trade in return the "old" set of carbs if they are still in a good rebuilt condition.  Dirt and grease is no problem but corrosion of the aluminum on the inside of the carb floatbowls has to be minimal.  Please take contact and ask for the possibilities. Shipping costs to send your set to Holland is or the buyer. Trade in price to be discussed.
TIP: it is adivsed to fill up the carbs with fuel before mounting on your bike, just to check the correct closing of the fuel cutoff valves. In case the overflow tube is leaking it will be more easier to solve this matter. When you come across this once mounted to the bike there is a lot more work involved.  From experience i know these cutoff valves can be a "pain in the ass" right after first filling with fuel.    Just be warned !! 
An other important thing to mention:  Do NOT use fuel containing Ethanol, because this is a disaster for these old type carbs.
Shipping costs within Europe is GBP 22,00.
Shipping costs outside Europe have to be calculated, approximately GBP 32,00.