Why Choose the AUTOPHIX 7310 Full System Diagnostic Scanner?

1. Full OBDII functions for all cars: Read Codes, Erase Codes, Live Data, Freeze Frame, Vehicle Info, I/M readiness, O2 Sensor Test, Component Test, On-Board Monitor, EVAP System(Mode 6), Battery Monitor

2. Basic functions for 46+ Systems: Read Fault Codes, Erase Fault Codes, Read Datastream, Version Information

3. TPMS Reset: Tire pressure resetting is required to be performed after maintenance is performed;

4. ABS Bleeding: When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;

5. Electronic Parking Brake Reset: Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;

6. Steering Angle Calibration: Perform steering angle sensor calibration and clear records;

7. Battery Register / Battery Maintenance: Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;

8. Oil Lamp Reset: Reset the oil life systems every time the oil and oil filter are changed;

9. Electronic Throttle Position Reset / Learn: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;

10. Injector: Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

11. Diesel Particulate Filter (DPF) Adaption and Regeneration: Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;

12. Airbag reset, Auto Gearbox reset, Air Suspension reset, Transmission System Functions/ESP System Functions /Immobilizer System Functions, etc.

Offer All System-Checking for You:

1. Engine System: Engine device that provides power for the automobile and the heart of the automobile. It determines the power, economy, stability of the automobile. The 7310 scan tool can read and clear your engine error codes, letting you know what's wrong with your car.

2. Auto Transmission System: AT is a set of transmissions used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. 7310 OBD2 scanner can read/clear codes and the error information from AT.

3. Airbag System: SRS is a device that expands the airbag to protect the passenger before the second collision occurs called Supplemental Restraint System (SRS). 7310 OBD2 scanner can read/clear code, turn off warning light of airbag.

4. ABS System: ABS automatically controls the braking force of the brake when the car is braking so that the wheels are not locked and in the state of edge rolling slip (the slip rate is about 20%) to ensure the maximum adhesion between wheels and ground. 7310 OBD2 scanner can turn off the light, and locate in the error part.

5. Diesel Particulate Filter (DPF) Regeneration : Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.

6. Tire Pressure Monitor System Reset: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7. Battery Register & Battery Maintenance: Re-match the control module and motoring sensor for battery detection more accurately, clear original low battery information and prevent the related control module from detecting false information.

8. Electronic Parking Brake Reset: Reset the brake pad after repairs in the electronic parking brake system are done. Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.

9. Throttle Adaptation: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel-injected car, a throttle position sensor and airflow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

10. Steering Angle Calibration: Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

1. How to get it to start?

Simply plug into the OBD II port on your car and turn the ignition on. It does not need any battery or charger, gets the power directly from the OBDII data link connector in your vehicle.

2. Why the vehicle linking error?

I: Confirm that the ignition is ON, check if the scan tool's connector is securely connected to the vehicle's DLC;

II: Turn the ignition off and wait for about 10 seconds and turn the ignition back to on and continue the testing;

III: Verify the control module is not defective.

3. How can I change the LANGUAGE?

AUTOPHIX 7310 works with English, German, French, Spanish, Finnish, Dutch, Russian, Sverige, Suomi, Norge, Dansk, and Portuguese, you can choose from the settings menu.

4. How can I change the brightness of the screen?

AUTOPHIX 7310 has Two skin styles for choosing, you can choose white skin to enhance visibility during the day, and you can choose black skin to protect your eyes during the night. These functions can be implemented on the settings menu.