• The USB interface connected to the 2.5 and 3.5 inch IDE and Sata hard disk interface.
  • USB2.0 TO IDE/Sata high-speed connection. USB2.0 high-speed transmission, stable performance,
  • Support Sata Hard drive, 2.5" laptop hard drives, 3.5" desktop hard drives, CD-ROM, DVD-ROM, CD-RW, DVD-RW Combo devices.
  • Support system: Windows 2000, ME, XP, Vista and Mac OS. Under Windows 2000 / ME/XP/Vista, don't need the driver.
  • Hot plug, plug, and play. A transfer rate of up to 480 MB/s.
Size:
  • USB Cable Length: 62cm / 24.41in.
  • 4 Pin power cable Length: 17.5cm / 6.89in.
  • Sata cable Length: 36cm / 14.17in.
Usage:
  • Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using. (there is no power supply in the kit)
Connection order:
  • first, connect the power cord line to 220 v mains.
  • connect the power adapter to the power cord end (so as not to spark phenomenon caused by the electric current is too large, a few may be burned power adapter).
  • connect the USB cable to your PC, and power on the hard disk box can exchange data after the computer identifies USB device a few minutes later.
  • Hard disk box removal: Remove the Hard disk box as the way of USB device removal, and then pull out the hard disk box.
Notice:
  • The power adapter might become hot, please pay attention to keep good heat dissipation. 
  • Please remove the ac adapter, If you do not use it.
  • Do not connect it to the wiring board, so as not to accelerate the aging of the electronic components and lower the service life of the product.
  • Summer arriving, the weather is hot, don't use hard disk box or drive line time for a long time, it is easy to burn in such hot weather.
Package includes:
  • 1 x USB 2.0 to IDE Sata Adaptor Cable
  • 1 x 4 Pin power cable
  • 1 x Sata cable
Note: DOES NOT include Power Supply, hard disk, cd-rom
Support Sata Hard drive, 2.5" laptop hard drives, 3.5" desktop hard drives, CD-ROM, DVD-ROM, CD-RW, DVD-RW Combo devices. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using. (there is no power supply in the kit) connect the power adapter to the power cord end (so as not to spark phenomenon caused by the electric current is too large, a few may be burned power adapter). connect the USB cable to your PC, and power on the hard disk box can exchange data after the computer identifies USB device a few minutes later. Do not connect it to the wiring board, so as not to accelerate the aging of the electronic components and lower the service life of the product. Summer arriving, the weather is hot, don't use hard disk box or drive line time for a long