RD100 is OBD2 Scanner which is special for 12V cars, it includes 9 protocol which meet most of cars' need, support to scan most of cars which have OBD2 protocol, do quick scan and show error, each error code have a explanation in the follow, so u will know what error your car has immediately, it is stronger more than u think, also have 9 language u can select, so don’t need to worry about u don’t understand what is that mean. Low price and high quality scanner, what are u waiting for?
Features:
- Identifies which section of the emission control system has malfunctioned. You’ll get a general idea of what normally causes the code, and schedule a proper repair at a more convenient time.
Erase Codes
- Erases the codes from the vehicle after retrieving codes from the vehicle, and certain repairs have been carried out. Thus turning off the annoying MIL (check engine light).
I/M Readiness
- Checks whether or not the various emissions-related systems on the vehicle are operating properly, and are ready for Inspection and Maintenance testing. To help pass the emission test, and tell if it’s the time to have vehicle maintenance.
View Freeze Frame
- Takes the snapshot of the operating conditions when an emission-related fault occurs. These maintenance alerts help in identifying the problem easily, and let you know when need to go in for a vehicle inspection.
O2 Sensor Test
- Retrieves O2 sensor monitor test results of the most recently completed tests from the vehicle’s on-board computer. To improve the vehicle’s performance but also make it fuel-efficient. If you are a DIY then you can replace the defective O2 sensor for preventing possible damage to the catalytic converter. The latter may cost thousands of dollars to replace.
On-Board Monitor Test
- Retrieves test results for emission-related powertrain components and systems that are not continuously monitored. To see if the engine has any misfire or compression problems on a particular cylinder, which aren’t severe enough to trigger a check engine light. You can save a lot of guesswork, and prevent the emerging issues from causing a real driving problem, with no need to wait for days for certain OBDII self-tests to run, and possibly turn the Check Engine Light on.
EVAP System Test
- Initiates a leak test for the vehicle’s EVAP system. This helps check fuel vapor leaks including when there is a missing gas cap or a loose gas cap. You can start this test to prevent fuel from evaporating out of the tank and contributing to smog.
Vehicle Info
- Retrieves a list of information (Vehicle Identification Number, Calibration ID, and Calibration Verification Number). This is highly valuable for record purposes or car tracking. The VIN code can reveal car’s manufacturer, model, year and place of manufacture, all its features, technical specifications, also more specific and useful data, including authentic mileage and archive photos at different times, if it had any accidents, if it has been stolen, how many owners it had and so on.
Data Stream
- Retrieves and displays live data and parameters from the vehicle’s ECU. To show a long list of all the available data values as engine RPM, vehicle speed, air flow, engine load, fuel pressure, fuel trim value, engine coolant temperature, ignition timing advance, or closed-loop status. This allows you to watch for problems during a test drive, and so to find out which part goes wrong effectively.
LCD Color Screen:
displays test results clearly and saves power.
DTC LookUp:
Romondes RD100 OBD2 Automotive Scanner Support Car Models:
American (USA) car: Compatible with Standard OBD2 Cars from 1996 to Now: for Chrysler, for Ford, for GM, for Jeep
European car: Compatible with Standard OBD2 Cars from 2003 to Now: for Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for VW, for Ford, for Jaguar
France Car after 2006: for Citroen，for Fiat，for Renault，for Peugeot Not Support for Renault Clio 2/Megane/Dacia Logan,
Japanese car Compatible with Standard OBD2 Cars from 2005 to Now: for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota
Chinese car: Compatible with Standard OBD2 Cars from 2008 to Now: for BYD, for Chery, for Geely, for Great Wall, for Karry
NOTE:
Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.And this device only have OBD2 Functions,don't have Special Functions,Like ABS Reset,Airbag Reset... Please Leave us message in below format, we will reply you within 8 hours. for example : xx, 2005, 2.0cc, Diesel
Ancel OBD2 Car Diagnostics RD100 Support Protocol:
RD100 Support Engine full OBDII/EOBD diagnostic functions and support obd2 protocols car ,such as:
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
Romondes RD100 OBD2 Scanner Supported Languages:
English, German, Spanish, French, Italian, Dutch, Polish, Russian, Finnish.
Package Included:
Romondes RD100*1
Quick Support
Manual*1
Paper Box*1
We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect.
Please contact us if you need to use another method to pay.
Payment should be made within 7 days after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
We are not responsible for buyers’ local taxes.
Please include your special requests in eBay note if there is any.
Delivery time varies from 2 to 5 business days.
Please make sure it is correct and include phone number for delivery.
Please include your special requests in eBay note if there is any.
We are authorize distributor, our all items are 100% original and Our devices have warranty,
5 Year free repair for the devices.
In case an item arrives faulty, please contact us as soon as possible and keep it unused.
We will instruct you on how to return and get refund or replacement.
If the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics
for more than 15 years.
We are authorized first class distributor of Launch, Foxwell, Autek, Ancel, Innova, Autophix, Thinkcar, Kzyee brands,
and more brands will be show in our store in near future.
What Do We Have?
We have office and warehouse in US to ensure fast shipment and after-sale service.
We have more than 1000 employees devoting to customer satisfaction.
1:If youhave any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.
2: our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)
3:Please leave us Positive Feedback
and 5-stars★★★★★after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.
