SAFE & SECURE SHOPPING
100% SATISFACTION GUARANTEED
FAST SHIPPING
Happymodel Mobula7 1S Micro FPV Whoop Drone X12 5-IN-1 AIO Fight Controller New

Product Description

Happymodel Mobula7 1S Micro FPV Whoop Drone

 

We’re glad to launched our new Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season.


 Notice:
ELRS version will ship on February 18
Frsky/Flysky/PNP version will ship on March 20

The world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. This is amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.

 

The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable.

 

New onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event.

 

Features:

X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx

VTX Power up to 400mw

ELRS V2.0 Support

NEW RS0802 KV20000 motors

Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera

Smooth and powerful

Compatible for 1S Lipo/LIHV

Recommend 1S 450mah/550mah/650mah battery(Not include)

 

Specifications:

Brand Name: Happymodel

Item Name: Mobula7 1S 75mm Micro FPV whoop drone
Wheelbase: 75mm
Size: 99mm*99mm*40mm

Weight: 24g

 

Receiver option:

2.4G ELRS SPI

SPI Frsky D8/D16

SPI Flysky

PNP (without onboard receiver)

 

 

Package includes:

Item Name

Qty

Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame)

1

Option1: X12 ELRS V1.0 flight controller built-in SPI ELRS 2.4G receiver

1

Option2: X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver

Option3: X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver

Option4: X12 PNP V1.0 flight controller without onboard receiver

RS0802 KV20000 brushless motor

4

Gemfan 1610-2 bi-blade propellers(4cw+4ccw)

1

Runcam Nano3 1/3 CMOS 800TVL camera

1

Onboard 5.8G Openvtx 0mw~400mw VTX

1

1S parallel charging board

1

Propeller disassemble tool

1

Extra camera canopy

1

 

Spare parts specifications:

Motor

Mode: RS0802 KV20000
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm
Weight(g):2.0g
No.of Cells(Lipo):1S only

Propellers

Weight:0.24g

Material:PC

Pitch:1 inch

Props Dia:40mm

Center Thickness:5mm

Center Hole Dia:1.5mm

Flight controller

X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280

X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR

X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS

X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 or ICM20689(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 12A(each) Blheli_S 4in1 ESC

Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
Built-in voltage detection

Built-in current sensor

Onboard 4in1 ESC

Power supply: 1S LiPo/LiPo HV

Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300

Support Bluejay firmware

Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz

Antenna : SMD antenna
Telemetry output Power: <12dBm

Receiver protocol:  SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX Module

Couldn’t flash separately ExpressLRS firmware

Onboard Frsky SPI D8/D16 receiver Version

SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model

Channels: 8ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meter

Failsafe support

Onboard Flysky SPI receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200meter
Failsafe support

PNP Version

(without onboard receiver)

Full UART1 for external Receiver

Support CRSF/GHOST/SBUS/IBUS/DSMX protocol

IR1 pad(invert RX1) used for SBUS input

Onboard 5.8g OPENVTX

Firmware version: OPENVTX

Smartaudio v2.1

PIT Mode support

RCE Mode support

Channels:48ch

Transmitting Power: 0/RCE/25mw/100mw/400mw

Power supply: DC 5V

Current (5v): <650ma (400mw)

Runcam Nano3

Model: RunCam Nano 3

Image Sensor: 1/3" CMOS

Horizontal Resolution: 800TVL

Lens : 2.1mm(M8) FOV 150°

Signal System: NTSC

S/N Ratio: >50dB

Electronic Shutter Speed: Auto

Auto Gain Control (AGC): Auto

Min. Illumination: 0.01Lux@1.2F

D-WDR: Auto

Day/Night: Color

Power:DC 3-5.5V

Current: 110mA@5V  120mA@3.3V

Housing Material: ABS

Net Weight: 1.2g

Dimensions: L14mm*W14mm*H9mm

Lipo Battery

Capacity:650mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 60mmx18mmx8mm
Weight: 16g

Connector: PH2.0

 











Welcome to the XINTE Brand storefront. Our Stores is a leading global data storage brand that empowers you to create, experience and preserve your digital content across a range of devices. Shop leading storage solutions, desktop drives, portable HDDs, USB flash drives, SD cards and more now!

1. All price does not include any taxes or extra fees. We are not responsible for the problems caused by customs clearance. 

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 

4. The images shown are not the actual item and are for your reference only. 

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season. 

6. If you have not received your order after the Estimated Delivery of Shipping Method, please contact us in advance. We will trace your order and get back to you asap.

(Please notice that we can't decide your decisions about choosing to ship methods, which means you need to check carefully with the estimate delivery time and promise delivery time) Your satisfaction is our top priority!


1. You have 30 days to contact us  No reason to return within 30 days after signing，The shipping cost is Seller . 

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID. 

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from ebay. OR, you may choose to have a replacement. 

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.


We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback so that we can perform up to your satisfaction. 

It is impossible to address issues if we do not know about them!

We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond in a timely manner and will do our best to help you out. We encourage our customers to contact us with any questions or concerns. We'd like to be sure you are completely satisfied with your purchase.
Copyright © 2022 Tongtool