CANFORD DKM-LFH CABLE 10 pair, Eca, turquoise 340 Metres brand new. RRP £1000+

CANFORD DKM-LFH - DIGITAL AUDIO OVERALL FOIL SCREENED SOLID CONDUCTOR MULTIPAIR CABLE Low fire hazard

Wiring specifications for many public buildings now call for LFH cables to be used in certain areas, notably in corridors, risers etc. Under combustion circumstances, LFH cables have significantly reduced smoke emission, and the gaseous products contain no toxic halogens.

DKM-LFH is of similar construction to standard DKM, except that the PVC jacket is replaced by LFH materials. The performance is unchanged, although the bending radius is slightly greater as LFH materials are not as flexible as PVC.

Technical Specification:

Conductors: 1/0.4mm (0.126mm²) plain copper

Insulation: High density polyethylene, OD 0.88mm, according to BT CW1308 Cable Colour Codes

Lay-up: Two insulated conductors twisted together, pairs laid up together, and wrapped with polyethylene tape

Screen 1: Aluminium/polyester tape (aluminium side out)

Screen 2: Aluminium/polyester tape (aluminium side in), wound opposite direction to screen 1

Drain wire: 1/0.4mm tinned copper wire, between screens

Overall jacket: LFH material, turquoise

Overall diameter: DKM-LFH5 6.0mm, DKM-LFH10 7.7mm, DKM-LFH25 11.5mm

CPR Euroclass: Eca

Minimum bending radius: 75mm

Impedance: 110 ±10 ohms

Conductor resistance: 15 ohms/100m

Velocity ratio: 66%

Propagation delay: Any pair in the cable 243ns/50m (min.), 253ns/50m (max.)

Max. difference between any two pairs in the same cable 5.0ns

Step response: 10-50% transition time 4.5ns/50m (min.), 6.5ns/50m (max.)

10-90% transition time 50ns/50m (min.), 110ns/50m (max.)

Crosstalk: 25dB minimum