For Fiat Coupe Powerflex Poly Suspension Bush Kit Inc. Camber Bolts (93-00)


BRAND: Powerflex

MODEL: Fiat - Coupe (1993-2000), Brava, Bravo, Marea (1995-2001)

Powerflex Custom Suspension Bush Kit Consists Of:

Diagram Position 1: Front Lower Wishbone Front Bush PFF1-801 [Quantity 2]
Diagram Position 2: Front Lower Wishbone Rear Bush PFF1-802 [Quantity 2]
Diagram Position 3: Front Anti Roll Bar End Link Mount To Arm Bush PFF1-603 [Quantity 2
 
Also included - PowerAlign Camber Bolt Kit (10mm or 12mm) PFA100-10 or PFA100-12

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 12mm bolt. This fits 2 bolt hub to strut models only. 

*Please measure bolt size and advise if you need 10mm or 12mm bolts with your order.


This kit does not include anti-roll bar bushes. 

SPECIAL NOTES:

These bushes are designed to fit genuine control arms only.


PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted.

Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket.

It is only possible to fit these bushes after removing the arms from the car.

For arms fitted with the pressed steel rear bracket, the rubber bush may need to be burned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface.

 


 

Stay Connected

If you want to stay up to date with all of our latest products in stock then make sure to add us to your favourite sellers!