SUPERMICRO (Fujitsu Siemens)
X9DR3-F-SM005 Servermainboard, Bulkware
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Form Factor | |
Dimensions | - 12" x 13" (30.5cm x 33.2cm)
|
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family† (up to 135W TDP **)
|
Note | † BIOS version 3.0 or above is required |
Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
Cache | |
System Bus | |
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC RDIMM
- Up to 128GB DDR3 ECC/non-ECC UDIMM
|
Memory Type | - 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
|
DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Chipset | |
AHCI SATA | - SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
|
SCU SATA (Storage Controller) | - SATA 2.0 3Gb/s with RAID 0, 1, 10
|
SAS | - SAS from C606
- RAID 0, 1, 10 support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Video | |
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
SATA | - 2 SATA 3.0 ports (6Gb/s)
- 4 SATA 2.0 ports (3Gb/s)
|
SAS | |
LAN | - 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB | - 11 USB 2.0 ports total
(4 rear + 6 via header + 1 Type A)
|
Video | |
Serial Port / Header | - 2 Fast UART 16550 ports: 1 rear and 1 header
|
DOM | - 1 DOM (Disk on Module) power connector
|
TPM | |
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
PCI-Express | - 3 (x16) PCI-E 3.0 slots
- 3 (x8) PCI-E 3.0 slots
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
|
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
- Optional IPMI 1.5 / 2.0
|
Power Configurations | - ACPI / APM Power Management
- Main Switch Override Mechanism
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Voltage | - Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
FAN | - 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
![](https://www.merlinedv.de/files/layout_merlinedv/img/logo.svg)
Mein IT-Spezialist für Beschaffung und Support
MERLIN Kommunikationstechnik e.K.
Gerberei 19 91054 Erlangen Deutschland
|
|
Artikel
|
|
|
Sie erhalten eine Rechnung mit ausgewiesener Mehrwertsteuer. Es gelten die gesetzlichen Gewährleistungsfristen.
AGB
Es gelten unsere allgemeinen Geschäftsbedingungen, die Sie hier abrufen können.
|