- It adopts the latest 32-bit DSP digital processing technology.
- The driver control algorithm adopts advanced variable current technology and advanced frequency conversion technology.
- The auto-tuning function is integrated in the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motors.
- Users can set 200-51200 within the arbitrary subdivision and rated current within the arbitrary current value, to meet the needs of most applications.
- Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise.
- Can drive 4,6,8-wire two-phase stepper motor,suitable for Nema 17,Nema23,Nema24 and Nema34 Stepper Motor;Automatic halving of current at rest.
| - Input Voltage: 20-50V DC ( It is recommended to use 24V DC ),Output Peak Current: 1.0A-6A; Impulse response frequency up to 500KHz (factory default 200KHz)
- Photoelectric isolation, alarm output
- Photoelectric isolated differential signal input
- It has rising/falling edge, IO control spontaneous pulse, single/double pulse, high response/high speed and low vibration, self-measuring function.
- It has the protection functions of overvoltage, undervoltage and overcurrent.
- Variable current control greatly reduces the heat generation of the motor
- Ultra-low vibration noise.
| Dial Switches - SW1-SW3: Set The Operating Current (1.0A-6.0A)
- SW4 is a Half-Current function,when SW4=off,for half-current setttings,when SW4=on,current static state for full-current lock axis
- SW5-SW8: Set the speed of subdivision and spontaneous pulses
Function Setting: - SW9:Edge sel,off=fall,on=rise
- SW10:S-Filter,off=4ms,on=10ms
- SW11-SW12:Mode Sel
|