The right switch is not available in this version; the lift is operated manually directly on the tonearm.
The right switch is not available in this variant, the lift is operated manually directly on the tonearm.
RESTORED by ART-AND-SOUND
160 MKII black - white cream with SME Series III tonarm
Our turntables are lovingly put together, modified and assembled by hand.
Each of them is unique and differs in model, color and veneer grain.
The high-quality housings are restored or newly manufactured using qualified craftsmanship.
Electrical components are checked, Moving parts oiled and wearing parts replaced.
A final endurance test rounds off the complex work.
The customer receives a top-class device.
Item description:
Limit switch: No
Inner plate: metal
Bearing mandrel: 7mm
Basic dimensions: Width: 45cm, depth: 36cm, height approx. 18cm
The housing:
The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.
Cover plate made of 1mm aluminum with surface painting white cream
The Ortofon Vinyl Master Alpha cartridge:
With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.
The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.
The audio cable:
Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.
The turntable:
High-gloss finish in black, turntable support in transparent acrylic glass, 7" single puck made of demagnetized stainless steel
Height-adjustable spikes:
Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.
The drive belt:
The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).
The following Parts are as Accessoriesör erhäliltic and not component this auction:
The following parts are available as accessories and not included in this auction: