HEATHKIT SB-200 SB-220 HF Amplifier

Parasitic Chokes and Anode Clips 

Qty 2  each

This is the Assembly listed as PC1 and PC2 on the schematic.

It consists of the following items:

Parasitic Chokes, factory made, P/N 45-53, & 260-34, Anode Clips,  Qty 2 each.

These parasitic chokes consist of a factory wound heavy gauge plated wire over a 47ohm resistors.

On the SB-220, these are listed as one part number, 45-53, and shown on the parts list also as #27.

On the SB-200, these are broken down into two part numbers, 45-53 and 260-34 (Anode clips for the SB-200 tubes).  Listed on the parts list as #24 & #78.

The condition of this amplifier part is as follows:

• Removed from working amplifier.
• Leads not cut but unsoldered so they are the correct length for re-installation.
• These two include the plate clips for the 572B tubes.  The clips can be removed so that the chokes can be used with the SB-220.   
  Photo is typical of the ones you will receive.  May not be the actual ones shown. 

Tested, Guaranteed working.

Please see my other listings here on eBay for more SB-200/SB-220 parts.