Highlights
Brands
TowerPro MG959 Digital Servo Motor
Features
- Flux SKU:
AFBA100025 - Length (mm):
94 - Width (mm):
63.5 - Height (mm):
32.7 - Suitable (Noted projects):
Robotics - Brand:
Tower Pro - Main Colour:
Silver - Country of Manufacture:
China - MPN:
MG959-D 2019 - UPC:
Does Not Apply - Minimum Operating Temperature:
0°C - Maximum Operating Temperature:
55°C - Number of Items:
1 - Parts list:
1 Stepper Motor
1 Arm set - Hardware Compatibility:
JR
Futaba - Rotation:
180° - Spline Count:
22 - Stall Torque:
28kg/cm(at 4.8v)
32kg/cm(at 6V) - Type:
Servo - Deadzone:
1µs - Speed:
0.16s/60°C (at 4.8V)
0.13s/60°C (at 6V) - Noted Mechanical:
6061-T6 Aluminium gear set and shaft - Lead Length:
27cm - Connector Type:
JR
Description
This component is ideally suited to projects requiring controlled rotation. This is the Tower Pro MG959 Servo and armature kit. These motors are compatible with a large range of shields like the common Arduino Motor shield. They are easy to use and can be added just about wherever you can find a 5V source.
This servo is pulse controlled. This means that supplying a pulse will move it to a particular angle. In this case 0° is a 1.5ms pulse, 90° a 2ms pulse and -90° is a 1ms pulse. This may not be set by your controller by default or give you the full range of movement as such you may wish to try up to 2.25ms and as low as 0.75ms. Be aware that if you go to far you can break the servo.
| Wire | Description |
|---|---|
| Black | Ground |
| Red | VCC |
| Orange | PWM Signal |
| Length | Dimension |
|---|---|
| A(mm) | 43.5 |
| B(mm) | 40.2 |
| C(mm) | 36.8 |
| D(mm) | 20.1 |
| E(mm) | 55 |
| F(mm) | 27.7 |
Images
Our main postal service is the Royal Mail 24. We aim to post same day when orders are received before 15:00 GMT. Orders received after this time will be posted the next business day.
Returns
We accept returns of unwanted, damaged or faulty items within 30 days of purchase.
If you receive a damaged item please message us directly through the eBay messaging system; attach pictures if possible. This will enable us to process the return as fast as possible.
Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt.
Please ensure when returning an item, adequate packaging is used as we will be unable to process the refund if the items are damaged in the post.
Company
Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good quality components at reasonable prices that allow you, the customer, to have the confidence to embark on your project.
We are here to help you in any way we can. If you need to make sure a product is right for your needs or how to get the most from a product, please do not hesitate to contact us through the eBay messaging service (response usually within 24 hours).
Our Store
Cables
Clips & Clamps, Coaxial RF & BNC, Crimp, Flat Copper, IDC Ribbon, Molex, Phone, USB, Cable Ties & Organisers
Components
Battery Clips & Boxes, Buzzers & Loudspeakers, Capacitors, Crystals, Oscillators & Resonators, Fixings (Bolts, Nuts, Spacers, Standoffs), Heaters & Coolers, Heatsinks & Insulators, Jumpers, LEDs, Motors (DC, Drivers, Mounts, Pump, Servo, Sets, Stepper, Vibration), Piezoelectric, Relays, Resistors, Semiconductors, Sensors & Transducers, Sets, Solar Panels, Switches & Controls (Arcade, Lever, Micro, Optical, Panel, Reed, E-Stop), Wire
Connectors
Automobile, Aviation, Banana, Clips & Clamps, Coaxial RF & BNC, Crimps, Headers (2.0mm, 2.54mm, Sets), IC Sockets, Phone, Power, Terminal Block, USB, Waterproof
Machines
3D Printers (Cooling, Feeders, Heat Beds, Hot-end, Nozzles, Tape, Throats, Tube), General CNC (Coolant, Drag Chain, Dust Protection, Frame Plates, Touch Plates), Laser Cutting & Engraving (Complete Kits), Milling & Routing (Bits, Chucks, Collets, Complete Kits, Spindle Clamps)
Mechanical
Control, Drive Mechanisms (Armatures, Belts & Pulleys, Lead Screws), Fluid, Frame (Aluminium Extrusion, Brackets, Hinges), Guards, Linear Motion (Bearings, Shafts & Accessories), Radial Motion (Bearings, Gears, Propellers, Wheels & Castors)
Microcontrollers
8051 Chipset (Development Boards), Arduino-Compatible (Cases, Development Boards, Shields), ARM Chipset, BBC micro:bit-Compatible (Shields), CY Chipset, ESP Chipset (Development Boards, Shields), Kendryte Chipset, PIC Chipset, Programmers (Adapters, Modules), Raspberry Pi-Compatible (Shields, Case, Tools), STC Chipset, STM Chipset, Zigbee-Compatible (Shields)
Modules
Audio, Communication (1-Wire, Accessories, ASK, Bluetooth, CAN, Ethernet, GSM & GPRS, Light, Radio, RFID & NFC, RS232, RS485, TTL, Wi-Fi), Data Storage, Displays (Driver, LCD, OLED, TFT), Lasers, LEDs, Motors (Controller, DC, Drivers), Power (Adapters, Charger, Driver, Generators, Load, Rectifiers & Transformers, Regulators, Reverse, Transmitter), Relays (Accessories, Mechanical, Solid State), Sensors (Acceleration, Accessories, Compass, Current, Flow, Fluid Level, Gas, Gyroscopic, Heartbeat, Light, Magnetic, Metal, Particle, Pressure, Proximity, Signals, Sound, Temperature & Humidity, Ultrasound, Vibration, Voltage, Water), Signals, Solenoids, Switches & Controls (Arcade, Capacitive, Coin & Token, Conductive, Digital, Joystick, Lever, Magnetic, Membrane, Micro, Push, Rotary, Slide, Tilt), Timing
Power Supplies
Adapters, Units
Prototyping
Breakout Boards, Prototype Boards, Solderless Breadboards
Services
Tools
Electrical (Ammeters, Analysers & Debugging, Capacitance Meters, Etching, Function Generators, Insulation, Multi & Combi Meters, Oscilloscopes, Probes, Readers, Scales, Soldering, Transistor Testers, Voltmeters), Mechanical (Clamps, Crimpers & Strippers, Extractor, Measures, Pliers, Punches, Screwdrivers, Tweezers), Protective (Glasses & Goggles)