1. Dismantle the stock bumper
2. Disassemble the entire space under the bumper.
Remove the plastic cover and air ducts.
3. Cut off the protruding element of the metal bar.
(protruding part, the new bumper will rest against this) In photo number 1,
this element is highlighted in red and needs to be cut off. In photo number 2,
the bar for the Tesla models after the 2016 restyling. need to get the same. Since the upper part of
our bumper is exactly the same as the bumper after 2016.
4. Remove the standard mounts (under the hood).
Install modified mounts. For a new bumper.
5. Make a preliminary installation of a new bumper
without installed equipment.
But, preferably with an apron, make sure that it does
not rest against the side radiators.
Make sure the mounting holes of the side mounts match.
Adjust if necessary. Also in place, drill holes in the mounts under the hood.
Drill holes for the sensors if they are part of the
vehicle modification. If this is not the case, putty the marked places before
painting.
Fitting is desirable to do with installed chrome.
6. After making sure that the bumper is normal
instaled- you can take it for painting.
7. After painting, repeat the entire procedure again.
But already install all the equipment on the bumper - fog lights. eyelets. an
apron as well as sensors or radar, if the vehicle modification is equipped with
it.