1.Chemical composition |
Components | ST |
ZrO2+HfO2+Y2O3 | ≥99% |
Y2O3 | 4.5%-6.0% |
Al2O3 | <0.15% |
Other Oxides | <0.15% |
2.Physical characteristics |
Properties | ST |
Density before sintering(g.cm-3) | 3.15±0.05 |
Density aftersintering(g.cm-3) | 6.09±0.01 |
CTE(25-500℃)(K-1) | 10.5±0.5 |
Flexural strengthafter sintering(Mpa) | 1200 |
Accelerated aging surface monoclinicphase content | <15% |
Light transmittance(1.0±0.02mm) | 41%-43% |
Chemical solubility after sintering(μg.cm-2) | <100 |
Cytotoxicity | 0 Level |
Radioactivity(Bq.g-1) | <0.1 |
Sintering temperature(℃) | 1500-1550℃Recommend 1530℃ |
3.Range of application |
Zirconia type | ST |
Recommended application | Full contour |
Matchedcoloring liquid | ST 16 shade liquid |
4.Sintering curve |
Fig 1. Recommended sintering curve (ST/ST Multilayer) |
Sintering temperature of ST/ST Multilayer is from 1500℃ to 1550℃,you should make sure peak temperature at this range. The recommended sintering temperature is 1530℃. |
The item has been cleaned and handled in accordance with the manufacturer’s instructions.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Tzalash Import and marketing LTD
P.B 12757
Ashdod
Israel
+9728676076