The SMD material belt type components are all suitable,Diameter of belt wheel:Any size fits,PITCH:1,2,4,8,10,12,16,24,32,44,56mm,WIDTH:4,6,8,12,16,24,32,44,56mm (note: smaller or wider distance can be developed or customized according to demand)
|
Completely automatic way computation components quantity,facilitates a material,sends the material work simplicity of operator. | The SMD counter adopts the principle of photoelectric sensing,and uses the corresponding relation between the guide hole and the part,Has a special inventive mind against material belt will fall off the design to reduce to the material belt’s injury to the smallest | May install the scanning gun and the bar code printer,facilitates the management work. get the data more quick and convenience.can realize the convenient and quick count,is the high efficiency auxiliary equipment of SMT material management. |
Note- After unpacking, please check if all the attachments are complete. - Please read the operation manual carefully before using and keep it properly. - Check whether the voltage specification is consistent with that of municipal power. - Please make sure to connect the ground wire to ensure the safety of the person and parts. |
1) | connect the power cord to the host and connect the AC220V power supply |
2) | turn on the POWER switch of the machine panel, and the LCD panel will shine |
3) | press PITCH to set the spacing of parts to be counted and press "ENTER". Place the parts to count on the left side tray. |
4) | manually pull out the material belt and clamp it between the material plate and counting gear, and align the intermediate hole of the first part and blank space to the middle line of the material plate. |
5) | press the "stop/reset" button for 2 seconds to return the number to zero. Note: when pulling the material belt, the counting gear will rotate and count. |
6) | press the "setting" button to switch to manual and automatic mode. If you choose automatic mode, you must input the quantity you want to count. Otherwise, press "forward" and the motor will not rotate. |
7) | pull the material belt by hand and wind it to the empty material plate. Press "forward /RIGHT" to count. |
8) | the motor will stop when the quantity arrives. Due to the inertia principle, the number of counts may be more or less than the set value of about 1,which can be manually rotated to the LCD display set value in the direction of the material disk,that is, the number of parts |
9) | after counting, press "reverse /LEFT"tape and then roll it back to the original LEFT panel, and then stop rotating |
Statement (FDA, ARTG)
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and
state and local regulatory agencies. If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
* Feature * | Creative Design,Durable Material,Beautiful Appearance |
---|---|
Note: | Do not send to Brazil |
Bundle Description: | No |
Feature 1 | *Stable characteristic*, *high reliability* |
shipping notice | Can not ship to Puerto Rico,Alaska/Hawaii |
Item location: | CA /NJ /Austell |
Transportation does not include: | canarias |
shipping notice: | Can not ship to Puerto Rico,Alaska/Hawaii |
Outlook size | L470*W300*H180mm |
Weight | 10 kg |
MPN | Does Not Apply |
Brand | Unbranded |
Power supply | AC110V,60HZ |
Power | 25W |
Counting range | -99999- 99999PCS |
Model | Counting machine |
Custom Bundle | No |
Modified Item | No |
shipping notice: | Can not ship to Puerto Rico,Alaska/Hawaii |