Cyclistick

Our Chainstay Protectors prevent chain bite during riding and scratches during maintenance or transportation. The protector is designed to be used with the wider section towards the crankset to mitigate damage from a dropped chain. Made from automotive grade protection film that offers a 5-7 year life span.  

Includes:
3x Chainstay Protectors - 220mm x 28mm (narrows to 18mm)

APPLICATION

  1. Ensure frame is at room temperature (avoid installation below 12°C/53 F)
  2. Clean surface using alcohol based cleaner
  3. Place protector onto frame/crank
  4. Contour using light pressure (heat if required)
  5. Heat vinyl to activate adhesive*
  6. Allow to cure for 1 hour

*Use a heat gun or hairdryer, avoiding direct contact or prolonged exposure.

All our protection products are made form automotive grade film which requires the surface to be free from all contamination. Any interference may cause adhesion issues. 

Sustainability ♻️

All our packaging is made from recycled material and is 100% recyclable

Film backing paper can be recycled via soft plastic schemes available in most supermarkets

Info cards are printed on FSC Certified card & are 100% recyclable