Thanks for looking.
       This is made from Laser cut 1.5mm 304 Stainless Steel.  It has been rumbled to make it smooth and give it an abraded surface that also helps give a better seal, plus removes all sharp edges. 
        It gives a cleaner pickup at lower revs because it stops exhaust gas being recycled. If the EGR valve is playing up, then the improvement can be quite dramatic. 

     This fits:  The DW12 (DW12 TED4) 2.2L HDi engine only  (2179cc 16 valve), pictured. This engine come out late 1999 and was fitted up to 2006 in some models. Note: that it has the Cast Aluminium inlet manifold.

Will not fit the DW12 BTED4 with the plastic inlet manifold of the later ones – item number 111326393290 and 121319304838 for these.
Will also NOT fit the DW12 UTED engine fitted into the Boxer or Jumper vans - item number 121753362550> is the one for them.

      It fits in between the inlet manifold and the EGR pipe, as in the picture. It can not be used as a cover plate without the EGR tube, as the plate is too thin to do that.
      If you need 2 thick plates to be able to remove the pipe, just contact me, as I do have some that will fit ( the inlet and exhaust manifold)
1.  Cleaner engine oil helping to give longer engine life.

    2.  Turbo spooling up quicker, and at lower revs

    3.  Prevents soot build up in intake manifold, and valve's, which will lower the power

    4.  Smoother drive and quite often better economy

    5.  Help to pass the MOT, as black smoke output is tested for

For 24express delivery- must be paid before 3.00pm, and is working days only, so Fridays sending will arrive on Monday 

   PLEASE CHECK THAT IT IS THE  ENGINE IN THE PICTURES AS, THE LATER ENGINES HAVE VERY DIFFERENT EGR SYSTEMS WITH A THROTTLE BODY'S