Cannons UK 50cm x 50cm x 20mm, 30mm and 40mm Rubber playground tiles
CANNONS UK MATS, a name you can trust...
Beware of low grade Chinese imports. We only offer commercial grade tiles made in Europe to Europeon Standards
These tiles used to be 40cm x 40cm but are now 50cm x 50cm meaning you only need 4 tiles for a square Metre.
(Not sure how many you need, just let us know)
Cannons UK is a preferred partner in constructing children and sports playgrounds and recreation centres and sports fitness equipment for open areas. Cannons UK is our trademark that ensures safety, hygiene, quality and is the right choice for covering of your place.
Contact us for Bulk Discounts that are available
20mm tiles from £5.99 each
30mm tiles from £7.99 each
40mm tiles from £10.99 each
Our goal is to provide the best solutions for shock, heat and moisture resistance. Cannons UK rubber tiles can be used in severe conditions due to their high durability.
Rubber flooring , retain their shape and characteristics for years without any change. Weather conditions (cold, warm, humid etc.) do not change the shape.
The products are durable and stand out acids, lightweight alkaline chemicals and also high shock absorption, slip resistance prevent injuries. The surface of the tile prevents people's fatigue. Cannons tiles are lighter than other material and significantly less expensive. Rubber tiles are adhered to the floor with Cannons two-component polyurethane adhesive.
Recycled Rubber Safety Tiles
Bulk Discounts Available
Made in Europe to European Standards EN1177 and EN1176-1
FREE DELIVERY to UK Mainland included
|
APPLICATIONS:
FEATURES:
|
Description of technical characteristics:
Tile Size:
50cm x 50cm x 20mm, 30mm or 40mm
Colours: Red Black or Green
You have the option to either use adhesive or dowels (excluding 20mm) for installation.
Dowels are inserted into the sides of the rubber tiles to hold them together and form a floating floor.
This method is generally used when installing rubber tiles over grass, soil, etc.
FREE DOWELS ARE INCLUDED WITH THE 30MM & 40MM TILES ONLY (20mm tiles do not come with pre drilled holes or fixings)
Applications:
- Childrens playgrounds
- Sports facilities
- School playgrounds
- Fitness centres
- Walkways
- Terraces etc....
Features:
- Fireproof
- Prevents fatigue
- Stops Moisture's
- Resistance to abrasions
- Contains UV particles for outside climate conditions
Tested to TS EN1176-1 and TS EN 1177
DOWEL PINS INSTALLATION |
UPON DELIVERY Inspect delivered rubber tiles thoroughly. Any visual defects must be reported prior to installation. Store tiles in clean, dry, protected from direct sunlight environment at a minimum temperature of 5°C. Read installation instructions, warranty and other disclaimers before beginning any installations. |
Dowels are inserted into the sides of the rubber tiles to hold them together and form a floating floor. This installation method is generally used when installing rubber tiles with thickness of 3cm or 4 cm over grass, soil, etc
INSTALLATION REQUIREMENTS:
Requirements for the subfloor:
Soil must be free from large rocks and any organic material such as leaves, peat, wood or other materials which could decompose over time;
Subsoil should be flat and level;
Compaction of the subsoil with a compactor or roller may be required where subsoil is unusually soft or loose.
All subfloors must have a gradient (2% is suggested) to ensure adequate drainage.
If the subloor does not meet the above noted requirements, the flooring shall not be installed until the problem has been corrected!
*** It is the installer's responsibility to make sure all surfaces are suitable for installation. ***
INSTALLATION:
- Snap a chalk line between the center points of each opposite side. The place on the ground where the chalk lines intersect is the center of the plot. Use the carpenter’s square to ensure the center intersection point contains nearly perfect right angels.
- Beginning the first quadrant, layout the first two rubber tiles. Insert the dowels on one rubber tile. Use a rubber mallet to tap dowels into place.
- Push the two rubber tiles together so the dowels fit into corresponding holes. Place a tapping block against the end of one tile and use rubber mallet to tap the tiles together. Ensure the seams are as tight as possible.
- Continue to layout the first row of tiles with dowels. Stop when you reach the last full tile in a row at the perimeter.
- When you begin the second row, insert dowels into the first row tile. Use the rubber mallet and a tapping block to tap the rubber tiles in the first and second row together.
- Continue working across the floor until all tiles are in place.
Dowel secured rubber tile floors do not need any time to set or cure.
You can begin using the floor as soon as the last tile is installed.
Disclaimer:
Generally accepted installation practices should be followed.
Use of trained installation professionals is recommended for best results.
Cannons UK does not warrant any installation work and specifically disclaims liability for any direct or indirect personal injury, property damage or other costs or losses resulting from incorrect or inadequate installations.
Installation with Adhesive |
UPON DELIVERY Inspect delivered rubber tiles thoroughly. Any visual defects must be reported prior to installation. Store tiles and adhesive in clean, dry, protected from direct sunlight environment at a minimum temperature of 5°C. Read installation instructions, warranty and other disclaimers before beginning any installations. |
Installation Requirements:
- All subfloors must be inspected prior to installation;
- Suitable sublfoors: Concrete, Asphalt, Wood, Existing flooring – linoleum or vinyl (as long as it is completely adhered to the subfloor)
- All sublfloors must be free from structural defects, smooth, clean, dry and flat;
- All subfloors must be free of moisture, dust, salers, paint, primers, curing compounds, parting agents, adhesive removers, hardeners, as well as any solvents, wax, oil, grease, asphalt, gypsum compounds, salts, mold, mildew, or any other materials that may inhibit good adhesion;
- All subfloors must have a gradient (2% is suggested) to ensure adequate drainage;
- The moisture in the subfloor shall not exceed 4 % and the temperature of the subfloor shall be between 5°C and 30 °C;
- Always install tiles in favourable weather conditions:
Temperatures between +10°C; and +30°C,
Relative Air Humidity not exceeding 65 %.
If the subloor does not meet the above noted requirements, the tiles shall not be installed until the problem has been corrected!
*** It is buyer's responsibility to make sure all surfaces are in suitable condition to ensure good adhesion. ***
Installation: Determine Your Layout Dry Lay rubber tiles so that you have a good idea of what the flooring will look like and to choose your starting place. We recommend laying tiles using a brick – bond pattern in which tiles are staggered in alternating rows to provide long – term stability. To achieve the recommended “brick” pattern, it may be necessary to cut the first and last tiles. | |
Our XP2435 PU Adhesive has been specially formulated to adhere our Rubber Tiles to almost any surface including concrete, asphalt and timber. Always wear gloves. Let the Floor Cure Do no place playground equipment, furniture. Allow traffic or institute general cleaning procedure 48 hours after installation. |
Disclaimer:
Generally accepted installation practices should be followed.
Use of trained installation professionals is recommended for best results.
Cannons UK does not warrant any installation work and specifically disclaims liability for any direct or indirect personal injury, property damage or other costs or losses resulting from incorrect or inadequate installations.
Next day delivery for orders made before 1pm for orders to UK Mainland only. (excludes some parts of Scotland)
Delivery days are Monday-Friday
Orders over 50 mats: We will call first to arrange suitable delivery day.
Next day delivery is never 100% guaranteed although it is around 98% successful.
Please email or call for prices of any products to be sent outside of the UK Mainland. (including N.I and off shore islands)
Delivery
Next day delivery for orders made before 1pm for orders to UK Mainland only. (excludes some parts of Scotland)
Delivery days are Monday-Friday
Orders over 40 mats: We will call first to arrange suitable delivery day.
Next day delivery is never 100% guaranteed although it is around 98% successful.
Please email or call for prices of any products to be sent outside of the UK Mainland. (including N.I and off shore islands)
Cannons UK 50cm x 50cm x 20mm, 30mm and 40mm Rubber playground tiles
CANNONS UK MATS, a name you can trust...
Beware of low grade Chinese imports. We only offer commercial grade tiles made in Europe to Europeon Standards
These tiles used to be 40cm x 40cm but are now 50cm x 50cm meaning you only need 4 tiles for a square Metre.
(Not sure how many you need, just let us know)
Cannons UK is a preferred partner in constructing children and sports playgrounds and recreation centres and sports fitness equipment for open areas. Cannons UK is our trademark that ensures safety, hygiene, quality and is the right choice for covering of your place.
Contact us for Bulk Discounts that are available
20mm tiles from £5.99 each
30mm tiles from £7.99 each
40mm tiles from £10.99 each
Our goal is to provide the best solutions for shock, heat and moisture resistance. Cannons UK rubber tiles can be used in severe conditions due to their high durability.
Rubber flooring , retain their shape and characteristics for years without any change. Weather conditions (cold, warm, humid etc.) do not change the shape.
The products are durable and stand out acids, lightweight alkaline chemicals and also high shock absorption, slip resistance prevent injuries. The surface of the tile prevents people's fatigue. Cannons tiles are lighter than other material and significantly less expensive. Rubber tiles are adhered to the floor with Cannons two-component polyurethane adhesive.
Recycled Rubber Safety Tiles
Bulk Discounts Available
Made in Europe to European Standards EN1177 and EN1176-1
FREE DELIVERY to UK Mainland included
Description of technical characteristics:
Tile Size:
50cm x 50cm x 20mm, 30mm or 40mm
Colours: Red Black or Green
You have the option to either use adhesive or dowels (excluding 20mm) for installation.
Dowels are inserted into the sides of the rubber tiles to hold them together and form a floating floor.
This method is generally used when installing rubber tiles over grass, soil, etc.
FREE DOWELS ARE INCLUDED WITH THE 30MM & 40MM TILES
Delivery
Next day delivery for orders made before 1pm for orders to UK Mainland only. (excludes some parts of Scotland)
Delivery days are Monday-Friday
Orders over 40 mats: We will call first to arrange suitable delivery day.
Next day delivery is never 100% guaranteed although it is around 98% successful.
Please email or call for prices of any products to be sent outside of the UK Mainland. (including N.I and off shore islands)