R&G HEATED GRIPS
WILL FIT STANDARD 22MM BARS
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm
(4.9inches) in length long
(the most common grip size for sportbikes,
enduros, and scooters) BUT please measure to make sure
R&G Racing High Quality Heated Grips
All parts contained in box for an easy DIY installation
Provides the best warmth on the market
Ability to control what temperature you want easily
Can heat up to 60°C if required
Durable, Long lasting Grips
Perfect for any 22mm Motorcycle Handlebars
Fits in: 10-15 minute
Fits Handlebar Size: 22mm | 7/8 inch
Supplied with 2 grips, wiring harness, mounting brackets, adjustable control unit and easy installation instructions
Colour: Black
PLEASE NOTE THE BIKE BEING LISTED ISNT A
GUARANTE THESE WILL FIT AS WE CAN NOT ACCOUNT FOR MODIFICATIONS /
UPGRADES TO THE OEM BARS
R&G Heated grips add months to your motorcycling season and comfort to almost any ride,
with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs,
heating up to 35°C in only two minutes and max out at 60°C depending on heat setting
5 Different heat settings with LED indicator
Open ended to accommodate bar ends
Comes complete with all fixings
In
only 2 minutes the grips heat up to 35°C (95°F) and on those really
cold days, increase the heat setting (using the easy to use control box)
to get warmth up to a toasty 60°C (140ºF) is only afew taps away!
Includes
fused, pre-terminated wiring harness for connection to your motorcycle
battery or switched live circuit. Note: Maximum power consumption for
these heated grips is 4.0 amps per pair (48 watts).
For optimum
performance of the grip we recommend installing them using R&G grip
glue (available separately) and sealing the open bar ends the supplied
plug caps or with R&G Bar End Sliders
NOT TO BE USED WITH BARE HANDS
FITTING & WIRING:
•
R&G Racing heated grips are designed to fit over 22mm handlebars.
•
Remove the existing handlebar grips.
•
Slide heated grips in place. For some motorcycles it will be necessary to trim the end off the grip in order to
accommodate large bar ends. Use a Stanley knife or similar. On a small number of machines it is necessary
to use a mild adhesive or insulating tape in order to obtain sufficient fastness. If you use adhesive please
allow enough time for it to dry thoroughly before switching the grips on (approx. 24 hours)
•
Test firmness and security of grips before use. Do not use if the grip moves on the left bar or moves
independently of the throttle tube: seek professional advice.
•
Position
the grips so that the wires do not come into contact with the brake or
clutch levers. The throttle grip should rotate freely without
obstruction and without stretching or pinching wires.
•
The wiring harness should be installed with the switch in a suitable position, ensuring the wires from the
grips reach without stress or strain.
•
The switch can be mounted on a flat area or it can be fitted on the handlebar by using the enclosed base plate.
•
The wiring loom is designed for easy fitting. There are just two wires that need to be attached to the
motorcycle’s existing wiring system. All other connections are through the multi-pin block and cannot be
Dis-connected.
•
The grey (feed) wire can either be fitted to the positive terminal of the battery or to an ignition feed. The
latter option means that the grips cannot accidentally be left “on” when the machine is unattended.
•
The blue (negative) wire should either be connected to the negative terminal of the battery or to a negative
connection in the motorcycle’s wiring loom.
NOTE:
The “lo” setting is designed to be used after first warming the grips up on the “hi” setting. Satisfactory heat will not be
achieved by setting the heat directly to “lo” from cold.
In
only 2 minutes the grips heat up to 35°C (95°F) and on those really
cold days, increase the heat setting (using the easy to use control box)
to get warmth up to a toasty 60°C (140ºF) is only a few taps away!
Includes
fused, pre-terminated wiring harness for connection to your motorcycle
battery or switched live circuit. Note: Maximum power consumption for
these heated grips is 4.0 amps per pair (48 watts).
For optimum
performance of the grip we recommend installing them using R&G grip
glue (available separately) and sealing the open bar ends the supplied
plug caps or with R&G Bar End Sliders.
R&G Heated Grips will prolong your motorcycling season by providing warmth and comfort on those cold riding days.
Included waterproof control unit has the following features:
5 heat settings (20%, 40%, 60%, 80%, 100%)
LED indicators for power / heat setting
On / Off switch with LED indicator lights
Bracket for mounting controller on either side of your handlebars
Includes
fused, pre-terminated wiring harness for connection to your motorcycle
battery. recommendation using a power module, such as our PowerHub Fuse
Block, to prevent coming out to a dead battery in the morning.
Note: Maximum power consumption for these heated grips is 4.0 amps per pair (48 watts).
These
heated grips have an open-ended design for easy installation on bikes
with bar-end weights or throttle locks. If your bike does not currently
have bar ends, you can still install these grips, but your bar ends will
remain open.
Included in Kit:
2 heated grips
Adjustable control unit
Wiring harness
Mounting bracket
Mounting instructions
the bike being listed does not guarantee it will fit, we cannot account for modified handlebars etc
***
APPLICATION DETAILS ARE FOR UK SPECIFICATION MOTORCYCLES, IT IS THE
BUYERS RESPONSIBILITY TO ENSURE THE SPECIFICATION OF THE MODEL FROM
NON-UK COUNTRIES IS THE SAME AS A UK APPLICATION ***
As with all aftermarket products sometimes small modifications can be required to fit some products.
Photographs are for illustrative purposes only and shades may vary across computer monitors.
It is recommended that a competent mechanic fit these products.
About eBay
eBay
is a marketplace that allows users to offer, sell and buy just about
anything in a variety of pricing formats and locations.
eBay does
not have possession of anything listed or sold through eBay, and is not
involved in the actual transaction between buyers and sellers. The
contract for the sale is directly between buyer and seller. eBay is not a
traditional auctioneer.
While we may provide pricing, postage,
listing and other guidance in our Services, such guidance is solely
informational and you may decide to follow it or not. eBay does not
review users' listings or content. While we may help facilitate the
resolution of disputes through various programmes, eBay has no control
over and does not guarantee the existence, quality, safety or legality
of items advertised; the truth or accuracy of users’ content, listings
or feedback; the ability of sellers to sell items; the ability of buyers
to pay for items; or that a buyer or seller will actually complete a
transaction or return an item.
WE WOULD HOPE THAT ALL OUR
CUSTOMERS HAVE A GOOD BUYING EXPERIENCE WITH US BUT OCCASSIONALY
SOMETIMES THINGS DONT GO AS SMOOTHLY AS WE WOULD LIKE
WE ARE
ALWAYS HAPPY TO HELP YOU. SO WE WOULD APPRECIATE IT - IF ANY CUSTOMER
WHO IS UN-HAPPY OR HAS RECEIVED A BROKEN / DAMAGED ITEM IN THE POST OR A
LATE ITEM NOT ARRIVING TO PLEASE GET IN TOUCH WITH US BEFORE THEY LEAVE
THEIR FEEDBACK.
A note to our customers- we do run a very busy
retail showroom & a motorcycle training school which is open 7 days
a week. Stock updates & quantities are automated ,but sometimes it
is possible for products to sell out before they can be removed or
updated from our EBAY shop…if this does happen we will notify you as
soon as possible and offer a full refund
If the item was sent
out to the customer and was not collected in time from the royal mail
collecting offices – then the postage can not be refunded – as this is
the responsibility of the customer to either make sure a collection is
made in good time – or a redelivery can be organised via the royal mail
web page
Ebay's estimated delivery on the delivery page is
simply an estimate and not a definite date of arrival....if however your
order is late - please don’t hesitate in contacting us
Our
postage options are clearly available at checkout, you can choose from
the drop down menu which postal service you require and which one serves
you the best
International Buyers – Please Note:
Your
order may be subject to customs charges and/or import fees if you are
having an item delivered to a location outside of the UK. We cannot
estimate when these charges will be applied, how much they will come to
if applied and we regret that we cannot pay these charges. For more
information about customs charges please contact your local customs
office.
return policy
The customer must pay any and all
carriage charges. No returns of discontinued products, This policy does
not affect your statutory rights and does not refer to faulty goods
if
the purchase has been made in error, or is unsuitable or simply doesnt
fit then the outward postage will be deducted from the refund.
All returns are the responsibility of the buyer
If the recipient is not at home to take delivery of the order items may
be left with a neighbour or in a safe place please include your buyer
id name / item number inside the returned parcel
Disclaimer to buyers
PLEASE MAKE SURE THAT YOU READ & UNDERSTAND OUR TERMS BEFORE BIDDING!
While
we work hard to ensure that product information on our EBAY SHOP is
correct at time of listing, on occasions manufacturers may alter their
information guide and their photographs & prices.
Actual product packaging and materials may contain more and/or different information than that shown on our Ebay shop.
All
information about the products on our listings is provided for
information purposes only & comes directly from the manufacturer of
the product. We recommend that you do not solely rely on the information
presented on our Ebay shop when making your purchase.Please always read
the instructions provided with the product before using/fitting. In the
event of any safety concerns or for any other information about a
product, please carefully read any instructions provided on the
packaging and contact the manufacturer. Items may be shipped directly
from our warehouse or supplier to get it to you as quickly as possible.
In the unlikely event that the item may be sold out or on back order, we
will refund your money asap. Once the item ships ,a tracking number
will be sent, this may come directly from EBAY in the format of an
email.
MTW.DIRCT accepts no liability for inaccuracies or
misstatements about products by manufacturers or other third parties.
This does not affect your statutory rights