Cyclistick

Our Thick Protection Kit is designed to withstand more intensive riding. Made from 150 micron automotive grade protective clear film this kit provides cover for the chain stay and cable rub areas. 

Set includes: 

2x Chainstay - 210mm x 40mm
8x Oval Patch - 30mm wide
8x Circular Patch 18mm diameter 

APPLICATION

  1. Ensure frame is at room temperature (avoid installation below 12°C/53 F)
  2. Clean surface using alcohol based cleaner
  3. Place protector onto frame/crank
  4. Contour using light pressure (heat if required)
  5. Heat vinyl to activate adhesive*
  6. Allow to cure for 1 hour

*Use a heat gun or hairdryer, avoiding direct contact or prolonged exposure.

All our protection products are made form automotive grade film which requires the surface to be free from all contamination. Any interference may cause adhesion issues. 

Sustainability ♻️

All our packaging is made from recycled material and is 100% recyclable

Film backing paper can be recycled via soft plastic schemes available in most supermarkets

Info cards are printed on FSC Certified card & are 100% recyclable