R&G RACING TAIL TIDY BLACK
This Tail Tidy is suitable for the Honda CBR1000RR Fireblade (2006)
If you have a CBR1000RR 2006 or 2007 model you will need to purchase the Side Panels to complete the kit (see Related Products) - listed in my shop
FITTING
• Remove the small panels to side of rider’s seat (600 ONLY)
• Remove rear seat cowl
• Disconnect wiring to original number plate unit
• Undo the four bolts holding the original number plate unit to the subframe
• Remove indicators from original unit and fit to R&G tail tidy
TWO PER SIDE)
• Route indicator wiring through clips provided
• Fit R&G tail tidy in place, using the four bolts previously removed
• Reconnect indicator wires, checking operation (n.b. right side indicator has the ORANGE connector)
• Using red connectors supplied, re-attach the number plate light (suggest cutting connector from OEM unit
and splicing to R&G unit) NOTE number plate may be drilled to allow the light to be fitted through the plate
and the tail tidy. This allows the plate to be fitted slightly higher.
• IMPORTANT: IF FITTING A FULL-SIZE LICENCE PLATE AND PLACING IT FAR DOWN ON
THE LICENCE PLATE HANGER, THERE IS A SMALL CHANCE OF THE LICENCE PLATE
HITTING THE BACK WHEEL UNDER HEAVY LOAD AND OVER LARGE BUMPS IN THE
ROAD. IT IS YOUR RESPONSIBILITY TO CHECK FOR THIS POSSIBILITY AND TAKE
AVOIDING ACTION. FAILURE TO CHECK THIS COULD RESULT IN SERIOUS INJURY.
• The R&G wire with the red end goes to the OEM black wire
• Recheck that wires are not touching exhaust silencer
• Reassemble panels, reversing removal procedure
• Refit seats
• Depending on local laws, attach enclosed red reflective tape in an appropriate location
• Test the indicators and licence plate illuminator before riding
• On 2006 Fireblade (if panel spacers P001 are purchased)
Before refitting seats fit triangular spacer panels, using M5 OEM bolt through 6mm (rearmost) slot
in panel spacer and front M5 tapped hole in exhaust cover (plastic) and M6 button head screw and lock nut
through front slot of panel spacer and 6mm rearmost hole in R&G tail-tidy. These are fully adjustable and
should be adjusted to hide exhaust heat shield and follow the appearance of the bike.
Refit seat and carry out remainder of fitting instructions
As with all aftermarket products sometimes small modifications can be
required to fit some products.
Photographs are for illustrative purposes only and shades may vary across
computer monitors.
It is recommended that a competent mechanic fit these products.
About eBay
eBay is a marketplace that allows users to offer, sell and buy just about
anything in a variety of pricing formats and locations.
eBay does not have possession of anything listed or sold through eBay,and is
not involved in the actual transaction between buyers and sellers. The contract
for the sale is directly between buyer and seller. eBay is not a traditional
auctioneer.
While we may provide pricing, postage,listing & other guidance in our
Services, such guidance is solely informational and you may decide to follow it
or not. eBay does not review users' listings or content. While we may help
facilitate the resolution of disputes through various programmes, eBay has no
control over & does not guarantee the existence, quality, safety or legality
of items advertised; the truth or accuracy of users’ content, listings or
feedback; the ability of sellers to sell items; the ability of buyers to pay
for items; or that a buyer or seller will actually complete a transaction or
return an item
WE WOULD HOPE THAT ALL OUR CUSTOMERS HAVE A GOOD BUYING EXPERIENCE WITH US BUT
OCCASSIONALY SOMETIMES THINGS DONT GO AS SMOOTHLY AS WE WOULD LIKE
WE ARE ALWAYS HAPPY TO HELP YOU.SO WE WOULD APPRECIATE IT - IF ANY CUSTOMER WHO
IS UN-HAPPY OR HAS RECEIVED A BROKEN / DAMAGED ITEM IN THE POST OR A LATE ITEM
NOT ARRIVING TO PLEASE GET IN TOUCH WITH US BEFORE THEY LEAVE THEIR
FEEDBACK
A note to our customers- we do run a very busy retail showroom
& a motorcycle training school which is open 7 days a week. Stock updates
& quantities are automated, but sometimes it is possible for products to
sell out before they can be removed or updated from our EBAY shop…if this does
happen we will notify you as soon as possible and offer a full refund
If the item was sent out to the customer and was not collected in time from the
royal mail collecting offices – then the postage can not be refunded – as this
is the responsibility of the customer to either make sure a collection is made
in good time – or a redelivery can be organised via the royal mail web page
Ebay's estimated delivery on the delivery page is simply an estimate and not a
definite date of arrival....if however your order is late - please don’t
hesitate in contacting us
Our postage options are clearly available at checkout, you can choose from the
dropdown menu which postal service you require and which one serves you the
best
International Buyers – Please Note:
Your order may be subject to customs charges and/or import fees if you are
having an item delivered to a location outside of the UK. We cannot estimate
when these charges will be applied, how much they will come to if applied and
we regret that we cannot pay these charges. For more information about customs
charges please contact your local customs office.
return policy The customer must pay any & all carriage charges. No returns
of discontinued products, This policy does not affect your statutory rights and
does not refer to faulty goods
if the purchase has been made in error,or is unsuitable or simply doesn’t fit
then the outward postage will be deducted from the refund.
All returns are the responsibility of the buyer
If the recipient is not at home to take delivery of the order items may be left
with a neighbour or in a safe place
Please include your buyer id name / item number inside the returned parcel Returns accepted up to 30 days after date of purchase.
Disclaimer to buyers
PLEASE MAKE SURE THAT YOU READ & UNDERSTAND OUR TERMS BEFORE BIDDING! While we work hard to ensure that product information on our EBAY SHOP is correct at time of listing, on occasions manufacturers may alter their information guide and their photographs & prices.
Actual product packaging & materials may contain more and/or different information than that shown on our Ebay shop.
All information about the products on our listings is provided for information purposes only & comes directly from the manufacturer of the product
We recommend that you do not solely rely on the information presented on our Ebay shop when making your purchase. Please always read the instructions provided with the product before using/fitting. In the event of any safety concerns or for any other information about a product, please carefully read any instructions provided on the packaging and contact the manufacturer.
Items may be shipped directly from our warehouse or supplier to get it to you as quickly as possible. In the unlikely event that the item may be sold out or on back order, we will refund your money asap. Once the item ships,a tracking number will be sent, this may come directly from EBAY in the format of an email.
MTW.DIRCT accepts no liability for inaccuracies or misstatements about products by manufacturers or other third parties. This does not affect your statutory rights.