Cisco CCNA CCNP Lab 2500 Series Routers
2950 Series Switches with FREE rackmount kits
Our CCIE Experts have designed this LAB in such a way that you can implement CCNA Labs. All Equipment of this LAB has been fully tested and guaranteed to work!
Below is the list of all equipment you will get with this LAB.
1. One Cisco 2500 Series 2501 Router, 1 Ethernet port, 2 Serial ports (Loaded with Latest Cisco IOS)
2. One Cisco 2500 Series 2501 Router, 1 Ethernet port, 2 Serial ports (Loaded with Latest Cisco IOS)
3. Two Cisco 2950 Switch 12 Ethernet Ports (Loaded with Latest Cisco IOS) picture shown is for 1924 switch but we will ship 2950-12 instead
4. 2 Back to Back Serial Cables to connect Routers
5. 1 Console Cable to configure the Routers and Switch
6. 4 Power Cables
7. Access to our FTP Server from where you can download any IOS of 2500 Router and update according to your needs. Also we will provide you TFTP Server Software and documents about how to upgrade the routers to a different IOS, password recovery procedures and much more. Our experts can also help you setup your lab when you receive all equipment.
Output of 2501 Series Router
(8MB Flash, 1 Ethernet port (AUI), 2 Serial ports)
Router#show version
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.0(8), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 29-Nov-99 13:51 by kpma
Image text-base: 0x0303DE10, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Router uptime is 1 minute
System restarted by reload
System image file is "flash:x0001307"
cisco 2500 (68030) processor (revision F) with 8192K/2048K bytes of memory.
Processor board ID 04132629, with hardware revision 00000000 Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2012
Output of 2501 Series Router
(8MB Flash, 1 Ethernet port (AUI), 2 Serial ports)
Router#show version
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.0(8), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 29-Nov-99 13:51 by kpma
Image text-base: 0x0303DE10, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Router uptime is 1 minute
System restarted by reload
System image file is "flash:x0001307"
cisco 2500 (68030) processor (revision F) with 8192K/2048K bytes of memory.
Processor board ID 04132629, with hardware revision 00000000 Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2012