TOP QUALITY WINDOW TINT FILM
SILVER 15% LIGHT TRANSMISSION 85%
DARKER TINT
1 x ROLL 3m x 76cm (9'10" x 2'6")
+
FREE FITTING KIT
WINDOW
TINTING FILM FOR CARS, BOATS & BUILDINGS USE WITH KIT
FITTING INSTRUCTION:
IMPORTANT:
The film must be separated from its transparent
protective layer
this is best done with 2 small pieces of
scotch/adhesive tape/ sticked
on both sides of one of the corners of the film and
this will reveal its adhesive side,
please apply it on your window with plenty of soapy
water on the glass,
then press with the plastic tool (to avoid scratching
the film please
do not press too hard with the plastic tool or better
wrap it in some cloth).
Thanks
1. Clean window inside and out with soapy water. NO AMMONIA
2. Cut film pattern on outside of glass. LINEAR SHOULD FACE OUTSIDE
3. Trim film to fit on outside of window
4. Spray a light film of water on glass and film
5. Peel film apart from backing on inside of window. Use two pieces of
transparent tape to separate film from liner
6. Spray adhesive with soapy water solution
7. Place film on INSIDE of window
8. Spray film with soapy water solution and squeegee firmly
9. Trim film with new sharp blade, leaving 1/16” gap around edges
10. Spray film with soapy water solution and squeegee firmly
11. Drying time 3 days in full sun
Thanks for Looking!
The United Kingdom sets minimum light level requirements for vehicle window tint. Please make sure you follow these requirements: https://www.gov.uk/tinted-vehicle-window-rules