100% Brand new , never used
Item's color might be different from the picture because of the aberration.
Note: due to the battery is embargoed in the air transport, so the battery is not include in the package, thanks for your understanding.

Feature:
Copy several remotes into one
Face to face copy in seconds
Take control of your gadgets, car and home or garage by copy the functions of your original remote to this 4 channel RF remote control key fob with code learning functions and you'll always have a back up
4 channel remote control receiver with hole on back for wall attachment
Handy key-ring style remote control
Please note remote control duplicator can only copy fixed code and learning code remote control , cannot copy rolling code remote control
Works with the following remote control modules(please make sure your exisiting remote control whether compatible with):PT2260 PT2262 PT2264 PT2240 SC2260 SC2262 CS5211 HX2260 HX2262 HS2262 EV1527 HS1527 HX1527 SMC918 AX5026 SMC926
Ideal for use to duplicate your Existing Remote Controllers:Vehicle central locking
systems,Garage doors,Electronic gates,Electrical appliances,Car sunroofs,Heating systems
Specifications:
Operating voltage: DC 12V
Operating Current: 12 mA
Power :> 10 mw
Copy code:fixed code/learning code.
Operating temperature: -20 °C ~ +50 °C
Channels: 4
Frequency: 433 MHz
Remote operate battery:12V 27A ALKALINE BATTERY(ALARM)(not include)
Material:metal and plastic
Dimensions: 54 x 30 x 14mm
Weight: 33g
Operation Indication:
1) Erase the code
Press and hold both of the ""lock"" and ""unlock"" button on the remote control at the same time, it will flash once then stops and starts flashing quikly, at this time,please release the buttons, so the code will be cleared.
If the code was cleared successfully then when you press the button,it will flash once then stops.

2) To recover erased codes, depress and hold simultaneously both the small buttons of the lower row. The led shall light for one second or two then turn off for 3 or 4 seconds and finally blink when the codes are successfully recovered. If the LED flashes briefly one time only when the two buttons are actuated and/or if the LED doesn't blink at the end of the operation, the recovery isn't successful. Please retry.

3)Duplicating
Hold the original remote controller by left hand and hold the copy remote controller by right hand, please make sure the 2 remote controller close up. Press both of the lock buttons of the 2 remote controllers at the same time and hold, when the copy remote starts flashing quikly, please release the buttons.
If the code was duplicated successfully then when you press the button,it will flash and the function is the same as the original remote controller.

Notes:
1. Pls make sure that the operating frequency of your remote control is 433MHz.
2. Remote Control Duplicator can only copy fixed code, learning code, the common chip is SC2262 PT2260 PT2262 PT2264 PT2240 SC2260 SC2262 CS5211 HX2260 HX2262 HS2262 EV1527 HS1527 HX1527 SMC918 AX5026 SMC926, etc.Invisible code can not be copied, can not copy original car remote control , two-way remote control, can not copy rolling code remote control. Pls pay attention that rolling code HCS *** chips generally begins as HCS200, HCS201, HCS300, HCS301, etc.
3. keep away from all the stuff with electronic signals, such as cell phones, and other wireless transmitter wireless cat products. Make sure your remote control is fully charged.

Package include:
1 x 433MHz Wireless Remote Control