- The Esotec MW 182 is an 8 inch diameter woofer equipped with an extremely
large, 100 mm (4 inch) diameter voice coil with a dual centered magnet system
driving the MSP cone to ensure the greatest possible power handling. This impressive
driver is ideally suited for woofer or subwoofer applications in any high quality
car audio system.
To achieve the lowest possible moving mass, as is the case with all Dynaudio
voice coil designs, the unique oversized voice coils are made of pure aluminum
while the voice coil wire is itself wound in Dynaudio's proprietary technique.
Via an inimitable winding method, the lightweight aluminum coils are coated
with a special thermoplastic material. The coils are then processed in such
a way that the coil expands and contracts until the wires have reformed into
a solid mass of wire. By this method, an extremely durable and stable coil is
made, one not subject to warping and other problems commonly associated with
traditional loudspeaker voice coils. Concurrently, the density of the winding
within the magnetic gap is increased, as is the efficiency of the driver.
The MW 182 is suited for a wide array of installation enclosures, both sealed
as well as vented. The long linear excursion of the ultra low distortion MSP
cone is perfectly complemented by the mechanical integrity of the rigid steel
basket. In conjunction with the extremely large voice coil, the MW 182 delivers
not only high power handling but also a deep, tight and detailed reproduction
of bass free of any compression.
- Nominal long term IEC (Depending on crossover) 180 W
- Transient (10 ms) 1000 W
- Voice coil diameter dc 100 mm
- Voice coil height hc 17 mm
- Linear excursion, peak to peak 9 mm
- Max. excursion, peak to peak 26 mm
- Nominal impedance Znom 4 O
- DC resistance Re 3.7 O
- Voice coil inductance Le 0.5 mH
- Resonance frequency fs 40 Hz
- Mechanical Q factor Qms 2.8
- Electrical Q factor Qes 0.84
- Total Q factor Qts 0.64
- Mechanical resistance Rms 3.3 kg/s
- Moving mass (incl. air load) Mms 36.5 g
- Suspension compliance Cms 0.43 mm/N
- Effective cone diameter d 173 mm
- Effective piston area Sd 235 cm²
- Equivalent volume Vas 34 1
- Force factor Bl 6.4 Tm
- Recommended frequency range 30 - 2000 Hz
- Net weight 1.85 kg
- Overall dimension ø 239 x 86 mm
Mounting Hole Diameter
in
7.67
Mounting Depth
in
2.95
Voice Coil Diameter
in
3.93
Power Handling
W Peak
1000
W Continuous
180
Nominal Impedance (Znom)
Ω
4
Frequency Response
Hz
30 - 2000
DC Resistance (Re)
Ω
3.7
Resonance Frequency (Fs)
Hz
40
Voice Coil Inductance (Le)
mH
0.5
Equivalent Volume (Vas)
l
34
Moving Mass (incl. Air Load) (Mms)
g
36.5
Suspension Compliance (Cms)
mm/N
0.43
Force Factor (BL)
T•m
6.4
Mechanical Q Factor (Qms)
2.8
Electrical Q Factor (Qes)
0.84
Total Q Factor (Qts)
0.64
Net Weight per Speaker
lbs
4.07
- The Esotec MW 182 is an 8 inch diameter woofer equipped with an extremely
large, 100 mm (4 inch) diameter voice coil with a dual centered magnet system
driving the MSP cone to ensure the greatest possible power handling. This impressive
driver is ideally suited for woofer or subwoofer applications in any high quality
car audio system.
To achieve the lowest possible moving mass, as is the case with all Dynaudio voice coil designs, the unique oversized voice coils are made of pure aluminum while the voice coil wire is itself wound in Dynaudio's proprietary technique. Via an inimitable winding method, the lightweight aluminum coils are coated with a special thermoplastic material. The coils are then processed in such a way that the coil expands and contracts until the wires have reformed into a solid mass of wire. By this method, an extremely durable and stable coil is made, one not subject to warping and other problems commonly associated with traditional loudspeaker voice coils. Concurrently, the density of the winding within the magnetic gap is increased, as is the efficiency of the driver.
The MW 182 is suited for a wide array of installation enclosures, both sealed as well as vented. The long linear excursion of the ultra low distortion MSP cone is perfectly complemented by the mechanical integrity of the rigid steel basket. In conjunction with the extremely large voice coil, the MW 182 delivers not only high power handling but also a deep, tight and detailed reproduction of bass free of any compression.
- Nominal long term IEC (Depending on crossover) 180 W
- Transient (10 ms) 1000 W
- Voice coil diameter dc 100 mm
- Voice coil height hc 17 mm
- Linear excursion, peak to peak 9 mm
- Max. excursion, peak to peak 26 mm
- Nominal impedance Znom 4 O
- DC resistance Re 3.7 O
- Voice coil inductance Le 0.5 mH
- Resonance frequency fs 40 Hz
- Mechanical Q factor Qms 2.8
- Electrical Q factor Qes 0.84
- Total Q factor Qts 0.64
- Mechanical resistance Rms 3.3 kg/s
- Moving mass (incl. air load) Mms 36.5 g
- Suspension compliance Cms 0.43 mm/N
- Effective cone diameter d 173 mm
- Effective piston area Sd 235 cm²
- Equivalent volume Vas 34 1
- Force factor Bl 6.4 Tm
- Recommended frequency range 30 - 2000 Hz
- Net weight 1.85 kg
- Overall dimension ø 239 x 86 mm
Mounting Hole Diameter | in | 7.67 |
---|---|---|
Mounting Depth | in | 2.95 |
Voice Coil Diameter | in | 3.93 |
Power Handling | W Peak | 1000 |
W Continuous | 180 | |
Nominal Impedance (Znom) | Ω | 4 |
Frequency Response | Hz | 30 - 2000 |
DC Resistance (Re) | Ω | 3.7 |
Resonance Frequency (Fs) | Hz | 40 |
Voice Coil Inductance (Le) | mH | 0.5 |
Equivalent Volume (Vas) | l | 34 |
Moving Mass (incl. Air Load) (Mms) | g | 36.5 |
Suspension Compliance (Cms) | mm/N | 0.43 |
Force Factor (BL) | T•m | 6.4 |
Mechanical Q Factor (Qms) | 2.8 | |
Electrical Q Factor (Qes) | 0.84 | |
Total Q Factor (Qts) | 0.64 | |
Net Weight per Speaker | lbs | 4.07 |