NOT the cheap non-name
brand motors made for retail, those stepper motors heat up, make lots of noise and
don’t last.
DIY CNC ROUTER MILL LATHE ROBOT REPRAP MAKERBOT Prusa
Sanyo Denki
Better performance!!! with the removable damper, it is ideal for applications
where motor noise and vibration need to be minimized, such as in security
camera controls, simple movement systems in analytical instruments or in
marking engraving machines, repraps, markerbots etc.
Parameters:
- Current up
to 1.2A
- Holding Torque: unipolar 42.48
oz/inch (0.3N-m) bipolar 59 oz/inch (.42N-m)
- Voltage will
work with power supply up to 36VDC
- 1.8 deg / step
- 6 wire connection uni-polar or 4 wire connection
bi-polar
- width 42mm x 42mm
- total length of 39 mm with damper 44
- shafts length 16mmx 4mm diameter
- Connection wires provided from 2” to 12”
- The Pulley has 15 teeth, 2 pitch, 7mm x 9mm diameter. A belt that came off this pulley has a number S2M100
- Note: Motor could have purple or colored wires
- PIN5 / RED = A
- PIN3 / BLUE= B
- PIN4 / YL = A-
- PIN2 / ORG = B-
- PIN1 / WHT = COMMON
- PIN6 / BLK = COMMON
They’re in very good condition
(ALMOST NEW)
THE ATTACHED VIDEO THIS REPRAP OWNER IS USING THIS MOTOR YOU CAN SEE ONE ON THE PRINTHEAD