Without any sensor!

1, Overview

1.1 Built-cumulative count, down counting, counting phase can be identified.

1.2 Counting speed selectable

1.3 Optional relay, open collector output

1.4 Power off memory

1.5 magnification can be set to determine the value of the ratio between the count and display magnification range: 0.0001-99.9999

1.6 counter to external sensors for 5V, 24V DC voltage

 

1.7 10 kinds of relay types can be free to choose, and delay action relay functions

2, Technical Specifications

2.1 Display range: -199 999 to 999999, the decimal point position can be set

2.2 Display: 0.56 "Red High Brightness LED

2.3 Counting Accuracy: ± 0.005%

2.4 Maximum input frequency: 30KHz (raster table 15KHz)

2.5 Input signal waveform: square wave, sine wave, triangle wave

2.6 input pulse signal: NPN, PNP, open collector, bipolar orthogonal pulse light interrupter with contact switch, non-contact switch, incremental encoder

2.7 Input signal voltage: high H = 4 ~ 30V, low L = -30 ~ 0.6V

2.8 Preset Output: Relay output: contact capacity 220V AC / 3A

          Open collector output: voltage is less than 30V, current less than 100mA

 

2.9 Instrument Power: 85 ~ 265VAC, power consumption is less than 4VA (other power can be customized)

2.10 Working environment: 0 ℃ ~ 50 ℃, humidity below 90% RH

2.11 Dimensions: 96 * 48 * 82mm, hole size: 92 * 45mm