Kings Army Industrial Paint 400ml

Kings Army Industrial Paint is a unique single coat finish with outstanding early water resistance, allowing items to be painted and cured outside in inclement conditions. It can be applied directly over bare metal and most other surfaces and allows painted structures to be exposed to extreme weather conditions within half an hour, without rain spotting, surface blooming or any loss of film performance. Kings Army Industrial Paint is a formulation that effectively changes the rule of industrial finishing, since it dispenses with the need for heated or forced curing. This paint formula was inspired by the need for an underwater marine finishing system. 

Kings Army Industrial Paint is an ultra-high solids, quick drying coating containing high levels of anti-corrosive pigment, & offers outstanding early moisture resistance, with no loss of performance under highly adverse weather conditions, and will actually dry under water.

Each 400ML can comes with a colour coded label & a precision spray cap actuator . 

How to use: Ensure the surface is clean and dry. Shake can for 2 minutes prior to use to ensure uniformity.Apply with an even motion , from a distance of 20 – 25 cm.Coverage:400ml aerosol, which will cover around 4-6 square feet. (Estimation)

After use: Turn can upside down & spray for a 5 second burst, this will clear the valve and nozzle .

 Paint Your Military Vehicle , Airsoft Weapon , War Gear , Military Models & More With Kings Army Industrial Paint.

Kings Army Matt Lacquer 400ml

Kings Army Matt Lacquer is specially formulated for use with the king's army military paint range, it will add a near invisible extra level of protection to your paint work & whilst doing so offers your project a complete highly durable anti reflective matt finish, it also offers excellent adhesion & flexibility.

 Although this lacquer was developed for the king's army military paint , its use is not exclusive to this range of paints , it can also be used on most other painted surfaces , and will bring most gloss levels of paint down to a matt finish .

Nozzle / Cap Cleaner

Monstercolors spray nozzle cleaner is a must have when using aerosol spraypaint. Monster cap-nozzle cleaner will not only prolong the life of your spray nozzles but also will work as a graffiti remover. it will also clean up paint overspray and spills. Nozzle cleaner can also be used in the arts sector to create various effects on painted surfaces. Monster nozzle cleaner is fast and easy to use, simply attach blocked nozzle to the cap cleaner aerosol and press nozzle down several times in order to pump the solution through the nozzle. If nozzle is not sufficiently clear after this move to step two. Place the straw nozzle on the cleaner can and spray a sharp burst on to the blocked nozzle both in the male stem and release hole on the front of the blocked nozzle. You should you perform this after each use of your monster aerosol spray paint in order to prolong the life of your spray nozzle. Monster nozzle cleaner will also work in clearing nozzles from other brands of aerosols that have male spray nozzles, suitable eye and breathing protection should be worn when using nozzle cleaner. Each nozzle cleaner comes in a 400ml aerosol.

Monstercolors Plasti-Bond Plastic Adhesion Promoter 400ml. 

Monstercolors Plasti-Bond 1K coating is specifically designed to promote adhesion to various plastic substrates including automotive plastics, vinyl, trim, bumpers, fiberglass, melamine and more... It is quick drying and can be overcoated with most monstercolors paint systems. Use on your project prior to priming. Monstercolors Plasti-Bond comes in a clear finish. Available in a 400ml can size. Improves adhesion of all monster paints on difficult plastic substrates quick drying ideal for interior or exterior use. Cleaning Ensure surfaces to be coated are dry and must be cleaned using an appropriate product to remove all traces of contaminants. Application Spray over project from around 15cm building up several light coats ensure sprayed surface is smooth and then apply top primer coat, and finally apply top coat finish. Surface can be sanded to ensure smooth surface. Coverage 1-2 square metres per 400ml aerosol

Please Refer To Our colour Swatch Picture To Ensure You Have The Correct Choice Of Colour / This Is As Close A Match As We Can Achieve To The Actual Colour Of The Paint / If In Doubt Please Contact Us We Will Be Happy To Help !

Please note that if intending on using on areas where paint will come in to contact with fuel please use our military 1k cellulose paint.