|
Current Firmware:
|
1.200
|
|
Frequency:
|
FCC/IC model: 340.00 - 354.00 MHz North America
|
|
Channels:
|
32 channels
1-16 Standard Channels
17 - 32 selective Quad-Zone Triggering channels
Reverse compatible with all PocketWizard radios using Standard or Quad Zone Triggering channels
|
|
Zones:
|
A - B - C - D
Compatible with other PocketWizard radios with Quad-Zone Triggering channels
|
|
Antenna:
|
Precision tuned internal coil
|
|
Display:
|
Backlit 2.5cm (1.0") liquid crystal display (LCD)
|
|
Range:
|
Up to 500 meters (1600 feet)
(actual range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference)
|
|
Sync Speed:
|
Up to 1/250 for focal plane shutters
Up to 1/500 for leaf shutters
|
|
Triggering Speed:
|
Up to 14.5 frames per second (FPS)
|
|
Contact Time:
|
62 milliseconds in normal operation
2 milliseconds in High Speed Receive (HSR) Mode
|
|
Status Indicator:
|
LED: Green, Amber, Red status indications
|
|
Transmit Output Power:
|
Less than 1 milliwatt (0.001 watt)
|
|
Power:
|
Two (2) AA (IEC:LR6) alkaline recommended
NiMH, NiCAD, NiZn, Lithium acceptable (these chemistries may not report battery life accurately)
USB (optional AC adapter PW-AC-USB available)
|
|
Battery Life:
|
Up to 50 hours (with alkaline batteries)
|
|
Max Port Sync Voltage:
|
300 Volts (Camera/Flash Port)
|
|
Mac Current Handling:
|
1.0 A peak, 0.2 A (1/5 Amp or 200 milliamp) continuous current limited
|
|
Voltage Present:
|
3 volts, safe for use with all digital and film cameras
|
|
USB:
|
USB 2.0 Mini-B Connector
|
|
Housing:
|
High impact plastic with captive battery door
|
|
Weight:
|
120 grams (4 ounces) with batteries installed
|
|
Dimensions:
|
Height: 13.3cm (5.25"
Width: 5.1cm (2.00")
Depth: 3.2cm (1.25")
|
|
Operating Temperature:
|
Above -15 degrees C (5 degrees F) and below 50 decrees C (120 degrees F)
|
|
Storage Temperature:
|
Above -30 degrees C (-22 degrees F) and below 85 degrees C (185 degrees F) (without batteries)
|
|
Input/Output:
|
3.5mm (1/8") stereo miniphone jack, hot shoe
|
|
Mounting:
|
Hot shoe, lanyard/D-Ring loop, 1/4-20 threaded insert
|
|
Quick Guide
Stereo 3.mm (1/8") miniphone to miniphone cable
Mono 3.5mm miniphone to locking PC cable
Stereo 3.5mm miniphone to 6.3mm (1/4") adapter
Lanyard
Operation reference sticker
|
|
RoHS Compliant:
|
Yes
|
|
Optional Accessories:
|
Isolation bar, trigger buttons, camera motor drive cables, PC cables and adapters, flash sync cables and protective case
|
