IP20 Universal Regulated Switching Power Supply DC12V LED Transformer - The led transformer can power any of the led tapes or other led lights as long as the load voltage matches the voltage of your transformer.
- The transformer is fully enclosed, so it is safe to touch and can be installed in most locations.
- 100% full load burn-in test.
- Universal AC 110V-240V input / full range.
- It is good quality high performance.
- DC12V IP20 Universal Regulated Switching Power Supply LED
Transformer Connection: - The LED Transformer/Driver is used to power low voltage (12V) LED bulbs strip lighting or any other DC 12V devices.
- This is a Smart switch power supply for converting AC 110V/240V to DC 12V with a switch to choose the proper input voltage of AC 110V or AC 240V and provides a steady output voltage.
Applications: - This DC12V IP20 LED Transformer / Driver is used to power low voltage (12V) LED bulbs, strip lighting, CCTV camera, 3D printers, and many other devices that require a DC12V constant voltage power supply.
- LED bulbs require a constant voltage to work properly. Sometimes a normal 12V transformer will work correctly with LED bulbs, but in some cases, the lifespan of the bulb will be reduced.
- Using MR16 / MR11 LED lamps with our driver instead of an existing level transformer. Will nearly double the life of the MR16 / MR11 LED Lamp.
- Certificate: CE, RoHS certification.
Technical Information: - Output power in amp: As shown picture
- Output power in watts: As shown picture
- Material: Metal
- Input Voltage: AC 110V/240V
- Output Voltage: DC 12V constant Voltage
- IP rating: IP 20
Protection: - Due to the light and screen setting difference, the colour of the item may be slightly different from the pictures.
- Please allow slight dimension difference due to different manual measurements.
- Item colour displayed in photos may be showing slightly differently on your computer monitor since monitors are not calibrated the same.
Package Includes: - 1 x Selected watts IP20 transformer only.
Please Note: - No installation instruction, wiring cable, on/off switch, or screws come with this Unit.
- Professional installation of a qualified electrician is required.
- Transformers above 240 w has to be supported by a fan to enable them to dissipate the heat produced by the transformer as the air convection is not enough for the higher power transformers.
|