eBay

Note: These lightly used 3/8" chucks were removed from new and almost new Dewalt drills and replaced with 1/2" chucks at our customer's request. This was several years ago and they have been sitting ever since. Chucks have been cleaned, lubricated, packaged and are ready to go.

AUCTION IS FOR ONE USED CHUCK

DEWALT 330075-46

3/8" TWO SLEEVE JACOBS KEYLESS DRILL CHUCK 1/2"-20 THREAD

Fits most 3/8" corded and cordless applications with a 1/2"-20 right handed spindle mount.

Chuck will fit many Dewalt, Makita, Skil, Milwaukee, Hitachi, Bosch, Craftsman, Black & Decker, and many other corded and cordless drills.

FEATURES

Capacity: 1/32" to 3/8" diameter

Chuck Diameter: 1-3/4" at knurl

Chuck Length: 2-5/32" with jaws retracted

Spindle Mount: 1/2"-20 right handed thread

Two Sleeve steel and synthetic keyless chuck

Another quality product from Jacobs

Two sleeve version provides two handed gripping for drills/drivers without spindle lock.

This chuck replaces obsolete chuck part # 330075-47

Original equipment on the following drills:

Note: Please pay close attention to your Type number as some of the older models use a 3/8-24 spindle thread.

DeWalt	DeWalt
D21008 Type 1 Electric Drill	DW960P Type 2 Electric Drill
D21008 Type 2 Electric Drill	DW960W Type 1 Drill
D21008G Type 1 3/8 Electric	DW965 Type 1 Right Angle Cordless Drill
D21008K Type 1 3/8 Electric	DW965 Type 2 12V Cordless Rt Angle Drill
D21009 Type 1 3/8 Electric	DW966 Type 1 Right Angle Cordless Drill
DW108 Type 1 1/8 Electric	DW966 Type 2 Cordless Right Angle Drill
DW924K2AR Type 2 12V Hammer Drill	DW966 Type 3 Cordless Right Angle Drill
DW924K2B2 Type 2 12V Hammer Drill	DW971 Type 3 and 4 Cordless Drill
DW924K2B3 Type 2 12V Hammer Drill	DW971 Type 5 Cordless Drill
DW924K2BR Type 1 12V Hammer Drill	DW972 Type 3 and 4 and 5 Cordless Drill
DW924K-B2 Type 2 12V Hammer Drill	DW975 Type 3 Cordless Drill
DW924K-B3 Type 2 12V Hammer Drill	DW975 Type 4 Cordless Drill
DW927 Type 1 Electric Drill	DW975B Type 3 Cordless Hammer Drill
DW927V Type 1 12V 3/8"	DW975B Type 4 Cordless Hammer Drill
DW928 Cordless Drill	DW991 Type 1 Cordless Drill
DW929 Type 1 18V Cordless	DW991 Type 2 Cordless Drill
DW952 Type 4 Cordless Drill	DW991 Type 3 Cordless Drill
DW952B Type 4 Cordless	DW991 Type 4 Cordless Drill
DW953 Type 5 Cordless Drill	DW991 Type 5 Cordless Drill
DW953V Type 5 Cordless	DW991B Type 2 Cordless
DW954 Type 1 Cordless Drill	DW991B Type 3 Cordless
DW954 Type 2 Cordless Drill	DW991B Type 4 Cordless
DW955 Type 1 Cordless Angle Drill	DW991B Type 5 Cordless
DW955 Type 2 Cordless Angle Drill	DW991Q Type 3 Cordless
DW955 Type 3 Cordless Angle Drill	DW991Q Type 4 Cordless
DW955K Type 1 9.6V Drill	DW991Q Type 5 Cordless
DW958 Type 1 18V Cordless	DWD110 3/8 Drill
DW958 Type 2 18V Cordless	DWD110K Type 1 3/8" VSR Pistol Grip Drill
DW958 Type 3 18V Cordless	DWD110K Type 2 3/8" VSR Pistol Grip Drill
DW960 Type 1 Right Angle Cordless Drill	DWD112 3/8 Drill
DW960 Type 2 Right Angle Cordless Drill	DWD115 3/8 Drill
DW960K-2 Type 1 18V Drill	Black & Decker
DW960K-2 Type 2 18V Drill	1187 Type 100 Electric Drill

DW960K Type 2 18V Drill

Note: Please pay close attention to your Type number as some of the older models use a 3/8-24 spindle thread.

Features for this Jacobs series:

Split Bite Jaw: Increases Grip Over Standard Bite Chucks By Providing More Contact with the Bit.
Superior Gripping Force: Provides High Mechanical Advantage to Convert Hand Tightening Torque Into Superior Bit Gripping Force.
Hammerlock® Mechanism: Positive Locking Mechanism Prevents Loosening in Hammer and Other High Vibration Applications.
Anti-Lock Nut: Prevents Chuck From Locking Open.
Precision Operation: Meet or Exceed Stringent Din Run-Out and Dimensional Specifications.
Ergonomic Design: Material and Surface Finish Combinations Result in Increased Comfort and Performance.
Rugged Construction: Constructed of High Performance Material to Maximize Durability and Performance.

Easily replace that worn or damaged drill chuck (Don't forget those safety glasses!):

Look down inside the chuck and you will see the head of the screw holding the chuck on the spindle. The screw head may be slotted, Torx (Most all Dewalt are T-20 Torx), or even Phillips. This screw is normally a left-handed thread and must be turned clockwise to remove it. Remove this screw. Then insert the short end of a large Allen/hex wrench in the chuck jaws and tighten the jaws. Give the long end of the hex wrench a sharp rap with a mallet in a counter-clockwise direction to loosen the chuck from the spindle. Spin the new chuck on the spindle and replace the screw and you are done!

Here is a video that shows just how easy it is. There are many more on "YouTube".

http://www.youtube.com/watch?v=usC8unA5RiA

All purchases are carefully packaged and normally shipped within one day of payment receipt.

Thank you for your interest!

Please let us know if you have any questions or need additional information. We want you to be happy with your purchase!

Payment

All items must be paid for within 3 days of the auction ending. We only accept PayPal and we only accept PayPal from US accounts. We only ship to the confirmed PayPal address on the payment page!

Shipping & Handling

Buyer to pay all shipping and handling charges. International selling will be through the ebay Global Shipping Program only. International buyers must be from eligible countries and will be responsible for all Program Fees as determined through the Global Shipping Program. Please see the postage calculator with the destination zip code to determine your charges. We do not ship to APO/FPO Military addresses. We only accept PayPal and we only ship to a confirmed mailing address.

Returns

Buyer to contact seller within 14 Days of receiving the item. Buyer pays all shipping costs. Credit will be issued only for items returned in unopened original packaging. Buyer to notify seller and provide tracking information prior to returning any item.