Highlights
Brands
Keyes Arduino UNO L298P Motor Driver Shield
Features
- Flux SKU:
CCAA100023 - Length (mm):
68.5 - Width (mm):
53 - Height (mm):
24 - Form Factor:
UNO - Brand:
Keyes - Brand Series:
Funduino - Main Colour:
Blue - Country of Manufacture:
China - MPN:
EB-058 - UPC:
Does Not Apply - Minimum Operating Temperature:
-25°C - Maximum Operating Temperature:
130°C - Number of Items:
1 - Hardware Compatibility:
Arduino UNO
Arduino DUEMILANOVE
Arduino LEONARDO
Arduino MEGA
Arduino DIECIMILA - Pin Pitch:
2.54mm - Pin Arrangements:
Sensor (SIG/VCC/GND) - Pass Through:
Complete UNO 2.54 pass-through
1 Digital I/O pins (D,VCC,GND)
6 Analog I/O pins (D,VCC,GND) - Logic Level Voltage:
3.3 or 5V - Drive Current:
2A - Maximum Power Dissipation:
25W - Mounting Hole Size:
M3 - Mounting Dimensions:
52/45mm - Chipset MPN:
L298P - Noted Onboard Components:
Reset switch
Active buzzer
Description
This shield is ideally suited to adding motor control to your project. The module based upon the L298P H-Bridge chipset which allows you to connect 2 DC motors to your projects. This can be used with a wide range of microcontrollers including Arduino Mega, Diecimila, Duemilanove and UNO.
The shield provides screw terminals for connecting motors to as well as an external DC power supply. The shield gives you full access to the remaining digital and analog ports that an Arduino UNO can provide. Each analog pin is also given its own VCC and GND. Furthermore the shield provide correctly arranged breakouts for Bluetooth modules. In the situation that a power supply being used is within the Arduino range (typically 7 - 12V), the onboard OPT jumper allows you to pass power through to the board below.
Please do not hesitate to contact us if you require further information regarding the shield's operation.
| Interface | Description |
|---|---|
| D4 | Buzzer |
| D9 | Servo |
| D2 D3 D5 D6 D7 D8 | Open digital |
| A0 A1 A2 A3 A4 A5 | Open analog |
| D10 D11 D12 D13 | L298P |
Images
Shipping
We offer a host of shipping options to meet your requirements. Our main
postal service is the Royal Mail 24. We aim to post same day when orders
are received before 15:00 GMT. Orders received after this time will be
posted the next business day.
Returns
We accept returns of unwanted, damaged or faulty items within 30 days of
purchase.
If you receive a damaged item please message us directly through the eBay
messaging system; attach pictures if possible. This will enable us to
process the return as fast as possible.
Be aware, if an item is "unwanted", return postage will be paid by the
consumer. Furthermore, if a returned "faulty" item is found to not be
faulty, postage costs will not be refunded. We are unable to refund the
cost of a courier and will only be able to refund return postage on
receiving a copy of the postage receipt.
Please ensure when returning an item, adequate packaging is used as we
will be unable to process the refund if the items are damaged in the post.
Company
Flux Workshop began trading late 2014, drawing from years of experience
and interest in electronics and building CNC machines. With the aim to
supply good quality components at reasonable prices that allow you, the
customer, to have the confidence to embark on your project.
We are here to help you in any way we can. If you need to make sure a
product is right for your needs or how to get the most from a product,
please do not hesitate to contact us through the eBay messaging service
(response usually within 24 hours).
Our Store
Cables
Clips & Clamps, Coaxial RF & BNC, Crimp, Flat Copper, IDC Ribbon, Molex, Phone, USB, Cable Ties & Organisers
Components
Battery Clips & Boxes, Buzzers & Loudspeakers, Capacitors, Crystals, Oscillators & Resonators, Fixings (Bolts, Nuts, Spacers, Standoffs), Heaters & Coolers, Heatsinks & Insulators, Jumpers, LEDs, Motors (DC, Drivers, Mounts, Pump, Servo, Sets, Stepper, Vibration), Piezoelectric, Relays, Resistors, Semiconductors, Sensors & Transducers, Sets, Solar Panels, Switches & Controls (Arcade, Lever, Micro, Optical, Panel, Reed, E-Stop), Wire
Connectors
Automobile, Aviation, Banana, Clips & Clamps, Coaxial RF & BNC, Crimps, Headers (2.0mm, 2.54mm, Sets), IC Sockets, Phone, Power, Terminal Block, USB, Waterproof
Machines
3D Printers (Cooling, Feeders, Heat Beds, Hot-end, Nozzles, Tape, Throats, Tube), General CNC (Coolant, Drag Chain, Dust Protection, Frame Plates, Touch Plates), Laser Cutting & Engraving (Complete Kits), Milling & Routing (Bits, Chucks, Collets, Complete Kits, Spindle Clamps)
Mechanical
Control, Drive Mechanisms (Armatures, Belts & Pulleys, Lead Screws), Fluid, Frame (Aluminium Extrusion, Brackets, Hinges), Guards, Linear Motion (Bearings, Shafts & Accessories), Radial Motion (Bearings, Gears, Propellers, Wheels & Castors)
Microcontrollers
8051 Chipset (Development Boards), Arduino-Compatible (Cases, Development Boards, Shields), ARM Chipset, BBC micro:bit-Compatible (Shields), CY Chipset, ESP Chipset (Development Boards, Shields), Kendryte Chipset, PIC Chipset, Programmers (Adapters, Modules), Raspberry Pi-Compatible (Shields, Case, Tools), STC Chipset, STM Chipset, Zigbee-Compatible (Shields)
Modules
Audio, Communication (1-Wire, Accessories, ASK, Bluetooth, CAN, Ethernet, GSM & GPRS, Light, Radio, RFID & NFC, RS232, RS485, TTL, Wi-Fi), Data Storage, Displays (Driver, LCD, OLED, TFT), Lasers, LEDs, Motors (Controller, DC, Drivers), Power (Adapters, Charger, Driver, Generators, Load, Rectifiers & Transformers, Regulators, Reverse, Transmitter), Relays (Accessories, Mechanical, Solid State), Sensors (Acceleration, Accessories, Compass, Current, Flow, Fluid Level, Gas, Gyroscopic, Heartbeat, Light, Magnetic, Metal, Particle, Pressure, Proximity, Signals, Sound, Temperature & Humidity, Ultrasound, Vibration, Voltage, Water), Signals, Solenoids, Switches & Controls (Arcade, Capacitive, Coin & Token, Conductive, Digital, Joystick, Lever, Magnetic, Membrane, Micro, Push, Rotary, Slide, Tilt), Timing
Power Supplies
Adapters, Units
Prototyping
Breakout Boards, Prototype Boards, Solderless Breadboards
Services
Tools
Electrical (Ammeters, Analysers & Debugging, Capacitance Meters, Etching, Function Generators, Insulation, Multi & Combi Meters, Oscilloscopes, Probes, Readers, Scales, Soldering, Transistor Testers, Voltmeters), Mechanical (Clamps, Crimpers & Strippers, Extractor, Measures, Pliers, Punches, Screwdrivers, Tweezers), Protective (Glasses & Goggles)