Kuwfi 300Mbps Super WDS Wireless Bridge 1KM Wireless Distance Wifi Router Outdoor CPE Wifi Extending Monitor Project Partner

Noted:The 1km distance based on Point to Point Mode with 2pcs CPE ,without obstacle ,and also according your network environment,not 100%,hope you can understand .thanks!

Product Description

CPE130 is an economic outdoor CPE/AP with 300Mbps data rate, Qualcomm Chipset and build in 11dBi panel antenna,the transmit/receive wireless distance more than 1000 meters.

It supports Wireless AP, Gateway, WISP, Wireless Bridge, WDS operation mode, effective solution for PTP, PTMP application and outdoor long range wifi coverage application.

CPE130 with ABS waterproof, dustproof, temperature adaptive and lightening proof housing and antennas, can work in different environment. Meantime, it support 24V passive PoE, easy in setup even no power socket nearby, ideal for outdoor use;

Besides that, CPE130 with LED signal light to show signal strength, easy to find a suitable place of outdoor CPE, then firmware comply with AC controller system and Cloud Management System, which helpful in central management and data setting, to implement Advertisement and authentication function, save much human work and cost, more professional in outdoor wireless networking solution.

Product Features

More RF Power, More WiFi Range

CPE130 with 23dBm High RF power, equipped with 11dBi Panel Antenna, Point to Point WiFi distance up to 1000 meters;Meanwhile, the RF Power is adjustable for different country to comply with different WiFi Standards.

Multi operation mode for different application

Support multi operation mode such as Gateway, Wireless AP, Repeater, WISP, WDS mode to meet with multi application for different application

Power over Ethernet(PoE)

Support 24V passive PoE for some areas where power outlets are not readily available

Excellent Outdoor Weatherproof and Lighting Protection

With an outdoor waterproof and dustproof enclosure,buidling in lighting protection IC, CPE130 can be used in various weather conditions for stable performance;

Product Detail

Hardware:
Chipset		Qualcomm QCA9531
Wireless		802.11N, 2T2R 150M MIMO Technology
Memory		64MB RAM
Flash		16MB Flash
Interface		1*10/100 Mbps RJ45 Port, support 12~24V PoE
		1 Reset Button
Antenna		11dBi Panel Antenna, V: 60o L: 33o
LED Light		SYS WIFI Signal strength
Size		1809544MM
Power		POE: 24V/1A
RF Data
Frequency		802.11b/g/n:
		2.4~2.4835GHz
		Korea,Japan,ETSI,FCC
Modulation		OFDM = BPSK,QPSK, 16-QAM, 64-QAM
		DSSS = DBPSK, DQPSK, CCK
Data Rate		300 Mbps
RF Power & Receive Sensitivity
Mode	Data Rate			Standard	Receive Sensitivity (dBm)			RF Power (±1.0dBm)
					CH1	CH6	CH11
11b	1Mbps			≤-83	-99	-99	-99	21dBm
	11Mbps			≤-76	-92	-92	-92
11g	6Mbps			≤-85	-95	-95	-95	21dBm
	54Mbps			≤-68	-82	-82	-82	19dBm
11n HT20	MCS0/8			≤-85	-95	-95	-95	20dBm
	MCS7/15			≤-67	-79	-77	-78	18dBm
11n HT40	MSC0/8			≤-82	-93	-93	-93	20dBm
	MCS7/15			≤-64	-75	-75	-75	18dBm
Firmware
Operation Mode				Wireless AP, Gateway, WISP, Wireless Bridge, WDS
Protocol/Standard				IEEE 802.3(Ethernet)
				IEEE 802.3u(Fast Ethernet)
				IEEE 802.11b/g/n(2.4G WLAN)
Wireless				Auto-Channel selection
				Distance Control (802.1x Ack timeout)
				BSSID
Security				WEP Encryption-64/128/152 bit
				WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
				WPA/WPA2 Enterprise (WPA-EAP using TKIP)
				Hide SSID
System Setting			Web-based configuration (HTTP/Telnet)
Firmware upgrade			Upgrade firmware via web browser or TFTP
Administration			Admin Password can be configured
System monitoring			Status in hand , useful statistic and Event log
Log			Supports local logs, logs host, logs file export
Reset			Reset or factory defaults
Backup			Restore settings & configuration of the device to local file
Physical Property
Temperature			Working: -20°C~50°C
			Storage: -40°C to 85°C
Humidity			10%~95% (typical)