Welcome to our page!
For sale we have our custom made 5 x 120 VW Transporter T5/T6 15mm Wheel
Spacers sold in pairs with 10 x Extended 19mm Hex Head FLOATING COLLAR M14 x 1.5 HT wheel bolts
***PLEASE NOTE THIS KIT IS FOR T5/T6 WITH A STANDARD BOLT THREAD LENGTH OF 37mm***
IF YOUR BOLTS ARE SHORTER THAN 37mm MESSAGE US WITH THE THREAD LEGTH BEFORE PURCHASING
19mm FLOATING COLLAR WHEELS
Do you have AFTERMARKET wheels? check out our T5/T6 listing
Our Spacers are made from a 150mm outside diameter billet for ALLOY WHEELS ONLY!!
DO NOT BUY THIS ITEM UNTIL YOU HAVE CHECKED YOUR
HUB SPIGOT / LIP LENGTH. WE WILL NOT REFUND SPACERS DAMAGED DURING FITTING.
PLEASE
CHECK YOUR HUB SPIGOT LENGTH IS UNDER 15MM OTHERWISE THESE WILL NOT FIT.
Our 15mm spacers are bored to 13mm depth to accommodate the standard
hub spigot length. Some VW's have longer hub spigots than standard so please
check your fitment before bolting up and measure your spigot before purchasing
to check you can even fit 15mm.
Spacers are 15mm wide giving 30mm overall increase across the axle.
· All our custom-made spacers and adapters are manufactured from 6082 T6 Solid billet Aluminium and machined by our skilled Engineers at our Barnsley HQ.
One of the most cost-effective mods on the market and easy to fit in 7 steps
- Simply unbolt your wheel and remove.
- Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
- Apply a little copper grease or similar to stop the faces sticking together.
- Slide the spacer on to your existing hub.
- Check the spacer is sitting flush against the original hub with no visible gap
- Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.
- Secure the wheel with the extended bolts and torque them to the required spec.
Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.
All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD. Visit www.watfields.com
Please contact us to discuss any enquiries you may have