eBay

1 OF AQUABOON 5 MICRON 9.75” x 2.5” CARBON BLOCK FILTER CARTRIDGE
Activated Carbon Block Filter Cartridge is a blend of fine activated carbon, water, and a suitable binder that is mixed and molded then hardened or extruded to a cartridge filter of any size and shape. Carbon block is made of fine coconut shell removing chlorine, odors and tastes of many organic compounds, at the same time it offers a much finer filtration of suspended particles and dirt. Universal Industry Standard size of 9.75” by 2.5” and is compatible with most industry standard RO Filter units. Product Details: Class 1 Chlorine, Taste & Odor Reduction Dimensions: 9.75” by 2.5” Made with Premium Quality Coconut Shell Activated Carbon 5 Micron Filtration No Release of Carbon Fines Fits all Standard 10" Filter Housings, Reverse Osmosis Systems (Watts, Pentek & Hidrotek) and other Under Sink Systems 5,000 Gallon capacity @ 1 PPM Chlorine with 98% chlorine removal at end of cartridge life. Flow rate: 1 GPM Cartridge is designed for use in Under Sink Filtration & Reverse Osmosis Applications but not for whole house applications. Cartridges are individually shrink wrapped.

1 OF AQUABOON 5 MICRON 10" X 2.5" SEDIMENT WATER FILTER CARTRIDGE
AquaBoon 10" x 2.5" Sediment Water Filter Cartridge is made of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Each cartridge is individually shrink-wrapped. Sediment Filter is Melt Blown with thermally bonded 100% Pure POLYPROPYLENE Microfibers. Universal Industry Standard size of 10” by 2.5” and is compatible with most industry standard RO Filter units. Product Details: Micron rating: 5 Micron Dimensions: 10” x 2.5” Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply. Gradient Density, Multi-Layered, Melt Blown Sediment Filter Cartridge. Larger particles are trapped in the outer layers; smaller particles penetrate deeper. Greater dirt holding ability and longer life than non-layered cartridges. Thermally bonded polypropylene micro fibers for purity and chemical compatibility Contains no binders, agents, solvents, antistatic materials or wetting agents No surface binders to reduce flow and increase change-out frequency Cartridge is individually shrink wrapped How it works? Innermost Zone - small dust is filtered in the following layer to ensure the good filtration efficiency. Inner Zone - Small particles pass the outer layers, then filtered by inner layers, which made out of the fine fiber. Mid Zone - Multilayered structure layer and depth filtration pattern of the mid zone layer ensures good filtration efficiency and formed by thermal bond without use of any binders and adhesives. Outer Zone-The large dusts are filtered in following layer to prolong the filter service life.

1 OF AQUABOON 5 MICRON 9.75” x 2.5” GRANULAR ACTIVATED CARBON WATER FILTER CARTRIDGE
Granular Activated Carbon Filter Cartridge is made of a highly porous adsorbent material, produced by heating organic matter, such as coal, wood and coconut shell, in the absence of air, which is then crushed into granules. Activated carbon is positively charged and therefore able to remove negative ions from the water such as ozone, chlorine, fluorides and dissolved organic solutes by absorption onto activated carbon. Universal Industry Standard size of 9.75” by 2.5” and is compatible with most industry standard RO Filter units. Product Details: Dimensions: 9.75” by 2.5” 5 Micron Filtration Premium Quality Coconut Shell Activated Carbon cartridge is often used for Reverse Osmosis pre-filtration and many other filtration applications. Carbon filtration is excellent for removal of Chlorine, Bad Taste, Odor & Color and can be effective for removal of many chemical contaminants. This cartridge fits in Standard 10" Housings To keep your filter system operating efficiently, replace this cartridge as needed and on a regular basis. This can be 6-12 months for many residential applications. Before putting a new cartridge in service, pass 2-3 gallons of water through to waste to flush out carbon fines. Water flows from bottom to top with rubber gasket on top. Service Life: 5000 gallons @ 1 PPM Chlorine Cartridges are individually shrink wrapped.

1 OF AQUABOON 10” x 2” INLINE PRE/POST MEMBRANE FILTER
Inline filter is made with premium coconut shell based activated carbon. Inline post carbon filter is known as polishing filter, because it is usually the last stage of any standard reverse osmosis circuit. Being made of high quality coconut shell, it stabilizes the water tasting qualities and further removes any traces of bad tastes and odors. Product Details: This Inline Filter is made with Premium Coconut Shell Based Activated Carbon. Flow Rate: 0.75 GPM (2.84 L/min.) Removes Chorine, Chloramines, Bad Taste Odors, & VOCs. Dimensions: 10” x 2” Lifetime: Replace once a year This filter is often used as a Reverse Osmosis (RO) inline post filter. It clips on to the membrane housing and filters the water after the bladder tank, acting as a polishing filter.

1 OF HIDROTEK 75 GPD RO REVERSE OSMOSIS MEMBRANE
This membrane is rated at 75 Gallons per Day. If you have chlorinated water, we recommend you use a Carbon / Sediment Pre Filter. The residual chlorine in municipal or city water will destroy the Thin Film Composite (TFC) membrane. Hidrotek Reverse Osmosis Membrane elements are for home drinking water. The industry's most reliable advanced membrane technology and automated fabrication, allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers and residential customers can rely on. This membrane fits in standard 1.8" x 12" residential RO membrane housings. The industry's most reliable for home drinking water is the Hidrotek reverse osmosis membrane elements. Advanced membrane technology and automated fabrication in the Hidrotek reverse osmosis membrane allow these elements to deliver consistent performance for all customers. Hidrotek reverse osmosis membrane TW30-1812-75 element is NSF/ANSI Standard 58 listed. Hidrotek home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi. Because of environmental factors actual production may vary. Product Features: 75 Gallon Per Day Capacity 98% Stabilized Salt Rejection (Minimum Rejection 96%) NSF/ANSI Standard 58 listed Membrane Dimensions: 11.75" Overall Length, 1.75" Diameter (Fits Standard 2" ID Membrane Housings)