Puhui T8280 IR Solder Station 220 / 110V  PCB Preheater SMD Rework Preheat Station

$T2eC16R,!)kE9s4Z+lW-BRyD6J6Z2Q~~60_12

1. This machine selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely.

2. T-8280 can achieve to heat PCB board and component which contains lead or not,especially for the BGA and SMD parts.
3. Use infrared heat, easy to cut through, heat proportion, dont have sirocco flow. Dont shift the small components on the PCB board,ensure the welding quality.
4. This machine has 600W heating system, widely to 280x270mm.Can use together with the handhold infrared welder T-835.
5. Easily operate, you can operate it through easy training.
Technical Parameter

Work bench size

410x316mm

Rated voltage and frequency

AC220-230v/AC110V 60/50Hz

Complete machine power

1600W

Preheating plate power

1500W

Preheating plate size

280x270mm

Preheating plate temperature adjustable

0-450C

 

Main Components:


Preheating plate main body

1

Temperature sensor

1

PCB board holder

1

Power line

1

User manual (compact disc)

1

 

Main component function explanation:
Operation instructions:
1. Inspect the machine and then open it
Check the connection of the power line.
Turn on the power switch. Allow the T-8280 Power-On-Self-Test (POST) to complete. After this, Temperature set-points will display last value used.
The black switch on the front panel are used to control the infrared preheating plate; press the blue button (up),the red button(down), can adjust the infrared preheating plate temperature between 0 C and 450C. Press the button"ON",the infrared preheating plate starts to work, press"OFF",it stops working.
2. Operation of preheating PCB board
(1) The placement and adjustment of the PCB board:
According to the size of the PCB board, adjust the PCB board holder, then put the PCB board and fix the adjust knob.
According to the size of PCB board and welding technological requirement, press the blue button (up)and the red button (down), regulate the output temperature of preheating plate between 0C and 450C
(2) Preheating open and close:
Press the "ON" button,open the preheating plate about 3-5 minutes, make the temperature be the setting value then carry on the next step .
Finishing, press "OFF", the preheating plate stops working.
Attention:Dont close the power switch until the machine full cooling.
The preheating temperature set: If the PCB board contains lead, adjust the infrared preheating plate temperature to 100-120C; if not, adjust to 120-140C. You can also set the preheating temperature according to the users experience and technology.
3. Machine installation and adjustment:
The preheating plate heating type includes: the total pressure flow-through heating way and the PID percentage adjustment way. You can adjust it according to the preheating allowance. Generally speaking, if the preheating temperature is lower than 250 C , selects the PID percentage adjustment method; and if the preheating temperature is higher than 250C, use the total pressure flow-through heating way.
Adjustment method:
1. Press power-on, display: C=?
2. Press choose 0 or 1,every press the status change one time,
C=0 is PID percentage adjustment, C=1 is switching control.
3. Press OK
Cautions
1. After finishing, dont turn off the power immediately; make sure the infrared preheating plate complete cooling.
2. Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly
3. The high temperature operation, pay attention, avoid scalding.
4. If you dont use the machine for a long time, youd better pull off the power source plug
Warranty :
The whole machine maintains for one year and the spare parts maintains for three months. .Provides the immediate network online Q/A and the technical advisory work service.
Statement:
If there is any difference between users operating manual and actual product, according to the actual product!
$_57

 

 

  • Payment Policies:

    1. We accept Paypal only. 

    2. All payment should be completed within 7 business days after auction end.

    Shipping Policies:

    1.Item prossing time.

    We will dispatch the products within 1-3 working days upon the system confirms your payment,when buyers have some special request (e.g. Voltage ,color...etc.),we will delay to ship the orders and will inform buyers about it.

    2.shipping methods

    Items are shipped out via DHL/EMS express with tracking number .the shipping fee is 65USD to United States , Other Countries buyers should contact us for shipping fee.

    3.Delivery time:

    DHL usually takes 3-7 working days , EMS usually takes 5-10 working days.

    Return & Warranty

    1) 1 year warranty provided by manufacturer.

    2) Missing item or get wrong item or Get damaged items, DOA (dead on arrival)

    When you (buyer) get the package, if you find there are some items missing from your order or we sent you incorrect items or you find  the item is damaged (cracked) in appearance or the item does not work (DOA), please keep all the items in original condition and also keep the packing stuff, weigh all the items together with packing, then take some photos of them and send us the photos by email. Please contact us within 7 days after receipt of package. We will investigate the case when we get your email. If the case is true, we will send you the missing item or replacement or refund  (sometimes you may be requested to return the incorrect item). 

    3)If you are not happy for any reason with your purchase or you purchased the wrong item , If the return is not a result of our error, customers will be required to cover shipping cost both ways .

    4)all returned merchandise must be in original factory condition (including the original packaging and everything).

    5) all items must be returned within 30days of purchasing the item ,

    6) For the replacement, we will send it out in the shipment ways as the customer selected in their original order.

DataCaciques