Welcome to our page!


For sale we have our custom made 5 x 112 to 5 x 100 Wheel Adapters sold in a set of 4 with 20 x M14 x 1.5 shallow 17mm hex head bolts for fixing to the Hub.

 The adapter threads have stainless steel inserts for thread protection and a more secure fixing than standard threaded aluminium adapters.

Quick specs

• Hub bore - 57.1mm

• Hub PCD - 5x112

• Hub bolt thread - M14x1.5

• Wheel bore - 57.1

• Wheel PCD - 5x100

• Wheel Bolt thread - M14x1.5 (stainless steel insert)

•  Fixing bolts - 20 x M14x1.5 shallow hex head

• Thickness - 20mm  

• Quantity – 4

FULL KIT WEIGHT IS UNDER 5KGS


Adapters are 20mm wide giving 40mm overall increase across the axle.

LARGER 150MM DIAMETER ADAPTER


These Adapters are designed to fit a 57.1mm 5x112 HUB (VW fitment) and a 57.1mm 5x100 wheel bore (older VW/Audi fitment)

All our custom-made spacers and adapters are manufactured from 6082 T6 Solid billet Aluminium and machined by our skilled Engineers at our Barnsley HQ.


One of the most cost-effective mods on the market and easy to fit in 7 steps

  • Simply unbolt your wheel and remove.
  • Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
  • Apply a little copper grease or similar to stop the faces sticking together.
  • Slide the adapter on to your existing hub and tighten up with the bolts provided.
  • Check the adapter is sitting flush against the original hub with no visible gap
  • Gently position the wheel on to the adapter spigot taking care not to damage the machined surfaces.
  • Secure the wheel with the wheel bolts and torque them to the required spec.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD.

Visit www.watfields.com

Please contact us to discuss any enquiries you may have