Description
Fits Chevrolet Silverado Pickup Truck, 4" BARB WIRE Fender Hash Bar Racing Stripes.
Why Buy From Us?
QUALITY MATERIALS
We use Quality Oracal 651 Vinyl. All weather high temperature material that is rated for 6 years of outdoor durability and will give you a beautiful look that will last.
GREAT PRICES
FAST and FREE SHIPPING
We ship 5 days a week and ship within 24 hours of payment.
You may choose any color or side you'd like or both sides from the drop down menu above. A little trimming will be required to fit your car. Please email us with any questions.
Made by the owner of the Predator Corvette.
Whats included: comes with transfer tape on each stripe for easy install.
If you purchase 1 side you get:
1. 4" x 24" = 2 hash marks. Trimming required.
If you purchase both sides you get:
1. 4" x 24" = 4 hash marks 2 for each sides. Trimming required.
NOTE: the color of the barb wire is the color of your car.
About the vinyl:
ORACAL 651 is an outstanding intermediate glossy calendared vinyl. The unique ORACAL face film is 2.5 mil which splits the difference between 2 mil cast vinyls and most 3 mil calendared films. The result is a thinner, more conformable intermediate vinyl. Unmatched dimensional stability means ORACAL 651 will last longer with better resistance against shrinking, cracking, or peeling than any other calendared vinyl.
The repositionable pressure-sensitive solvent adhesive means you can apply ORACAL 651 on most substrates dry without application fluid and lightly reposition it until it's just right. Then apply pressure to activate the adhesive and finish the installation.
Installation Recommendations:
This vinyl can be installed using 3M Primer 94 and 3M Edge sealer, these are recommended by 3M vinyl wrap training class, these products will promote adhesion and add life to your vinyl. We would highly suggest using a 3M primer 94 or professional installation.
Installation info:
When installing the racing stripes, make sure the surfaces that you apply the material to must be smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination. Dry application only.
We are not responsible for improper installation. If you have any questions before you purchase, please email us.
Installation Instructions:
1. Make sure the surfaces that you apply the material to is smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination.
2. You can apply the racing stripes almost anywhere on the fender you like, normally with a 1" gap.
3. When you have the location you want to put the racing stripes, Peal off the backing from the decal (NOTE: pull off slowly.) exposing the adhesive side. Start from one side, stick the decal to the surface, then using a squeegee or a credit card wrapped in cloth to make sure it does not scratch the decal, start working your way to the other side of the decal applying pressure with the squeegee or credit card in order to remove the air bubbles. Be sure to apply pressure on the edges to make sure it is securely stuck on correctly.
4. When the vinyl has been applied, remove the transfer tape and trim the excess.
5. If you still have air bubbles under the decal, use the squeegee or credit card to work the bubbles out. Start from the middle of the decal and work them out to the edge.
Shipping information:
Shipping in the USA: Free Shipping.
International Shipping: Shipping is calculated by your Country and zip codes. USPS Priority International (6-10 Business days)
International Buyers: We don't have knowledge of other country's laws outside of the USA so please make sure that your postal service will allow the item into your country before buying them. We are not responsible for custom taxes or levies your country may charge you.
