-dunlop red fasel inductor , specially revoiced for fatter tone and better harmonics ( not shown in photos)

-all new parts, except recycled PCB with the 3 jacks.

 -tru-bypass wire carefully woven into the stock harness, looks like dunlop made it this way.

-mini 3pdt bypass switch for future adding of LED if desired. (not shown in photos)

-new hotpotz2, the most durable wah pot in history.

-special  ' two per side" sockets allow flexible tuning, taking the voice deeper or higher, included are multiple extra caps to give the range of the dunlop bass wah, jerry cantrell, 535Q, slash, zakk wylde, etc etc. you can re-voice the sweep, very easy!
for buyers - see note on using the cap kit below*

new! special front badge- hand signed by gagan & colorized, to let the world know this is no ' normal' crybaby. industrial 2sided tape applied.

-buffer is removed, not needed with our bypass circuit. gets the sound back to its original 60s unbuffered 'pure' wah tone. people are amazed at the reduced hiss and ' bigger' wah tone.

 NEW! TWO trimmers for great tuning ability!

- bias trim, First transistor can be re-biased HOTTER for those growly tones - all tunable in tandem with the input volume - as little or as much growl as you want.

-input volume trimmer for volume matching and HOTrodded wah tones!

- special online instructions and tech help by phone or ebay message system.

OPTIONAL: for an extra 15$, we can prewire a clear lens superbright  blue, orange, red or purple 3 mm LED (blue LED is 5mm). you must drill a hole near the switch to use it.
HOW to order LED  OPTION:
just send a message at checkout time if you would like us to add THE LED/3PDT option , we will invoice the $15 thru paypal and build it this way, with our standard orange LED.  see more about installing LED below **


BOTTOM LINE - GET BOUTIQUE TYPE TONE AT A VERY SWEET PRICE. NO SOLDERING!

we also will mod this kit for your desires, let us know-- we will work with you, and at a REASONABLE price.

fits all dunlop wahs with the board mounted jacks, plus many others :

VOX! this kit will fit '80s, '90s, '2000s dunlop made vox v847s, we have successfully done this for our customers.
you have two options:
1. YOU CAN ADD the HOLE to use the standard on-board power jack--- when ordering just let us know, we have special instructions for these. we supply a drilling template, you simply have to drill one 5/16" hole, instructions included. FREE quality new/sharp drill bit included upon request if you own a vox and want to drill for the power jack. or,
2. if you prefer you can leave the wah with no hole, the power jack will still be on board but is not affected if not accessed, and the PCB still fits fine.

chinese voxes, v845 , v847a from 2006 and newer: special instructions apply, our kit WILL fit but you must contact us if you are using the chinese vox shell, we include special mountin7.00g parts. see above photo for a guide on what needs to be cut in your chinese shell to fit our kit. -not very difficult if you have a drill and some good bits - approx 1/4" to 3/8" bit is needed, along with some good end nippers or dikes to cut the axle bolt.  see above photo for details.

( contact us for details on the chrome carvin wah , we have done fitments for these as well )

no risk trial, return for a full refund less shipping. no hard feelings, we do not want you to keep it if you don't LOVE it. even if you've installed it, we accept returns , as long as nothing is wrecked.

*notes on the caps,-- remember, caps are additive in parallel, so for example if you put two .01ufs in the sockets you get .02uf and so on. you will find a nice assortment of caps , you can mix & match for many different values. stock crybaby is .01uf, jerry cantell wah is .022uf,  bass wah is .068 uf and so on., some boutique wah makers like .015uf  to 018uf for a deeper bottom without being too woofy, and for a cool 70s wacka wacka funk , try a .007uf in there  - very nice!

**notes on optional LED - -to mount optional LED, just drill a 3.2mm hole ( 1/8") , use some clear glue to hold it ( we use loctite 'GO2 glue')

below are some of the comments we have received - thanks to all of you!:


"Amazing mod best wah ive owned drops straight in and ready highly recommended :) " -- passenger***

" The drop in kit is so easy and sounds awesome. It has replaced my keeley." -- m*cm**cer

"Does amazing work, good communication and friendly. Don't buy from anywhere else" - metalhelper  ( rewire of customer's wah)

"best thing I ever bought" -agent862XXXX - buyer of the drop in wah kit-

"great service, thanks" - onemorerebel  - buyer of the drop in wah kit-

"Absolutely fantastic! The mod sounds awesome!" --  jdrag***, purchased april 2014

"Brilliant product, drop in upgrade, sounds fantastic, easy to fit and mod"  -- ba***, purchased august 2014

SPECIAL NOTE::: we pride ourselves on our customer service, please read the many great notes in our feedback.
we are 100% here for you to make sure your install goes smoothly. we are online 7 days a week, very fast turnaround on tech questions ( we even include our phone number if necessary to speak to us).

PLEASE NOTE - the PCB in the kit you receive may be green or tan.
BONUS for our international buyers- while supplies last, we will send FREE our back cover art piece from the limited united states postal HENDRIX stamp. you can frame it!